28997

Futaba 7CAP Manual

42
Zoom out
Zoom in
Previous page
1/82
Next page
ACRO ADVANCE MENU FUNCTIONS:
Aircraft wing types (ACR O):
There are 3 basic wing types in aircraft models:
Simple. Model uses one aileron servo (or multiple servos on a Y-harness into a single receiver channel) and has a tail.
This is the default setup and requires no specialized wing programming.
Twin Aileron Servos. Model uses 2 aileron servos and has a tail. see Twin Aileron Servos.
Tail-less model (flying wing). Model uses 2 wing servos working together to create both roll and pitch control.
see ELEVON.
Twin Aileron Servos (with a tail) (ACR O): Many current generation models use two aileron servos, plugged into two
separate receiver channels. (If your model is a flying wing without separate elevators, see ELEVON,p.45.)
Benefits:
Ability to adjust each servo's center and end points for perfectly matched travel.
Redundancy, for example in case of a servo failure or mid-air collision.
Ease of assembly and more torque per surface by not requiring torque rods for a single servo to drive 2 surfaces.
Having more up aileron travel than down travel for straighter rolls ñ aileron differential. (see glossary for definition.)
Using the two ailerons not only as ailerons but also as flaps, in which case they are called flaperons.
Options:
5-channel receiver? Set up AIL-2 (see p. 43) in FLAPERON.
FLAPERON:
Uses CH6 for the second servo (see AIL-2 to use CH5 orCH7.)
Allows flap action as well as aileron action from the ailerons.
Provides FLAP-TRIM function to adjust the neutral point of the flaperons for level flight.
Also allows aileron di
Channel 6 = normal flaperons, 2 servos operate together as flaps;
Channel 5 or 7 = act like aileron differential did in prior radios; channel 6 is still FLAPS, and the 2 ailerons
never act together as flaps EXCEPT in the airbrake function.
fferential in its own programming.
NOTE: Only one of the two wing-type functions (FLAPERON,andELEVON) can be used at a time. Both functions
cannot be activated simultaneously. To activate a different wing type, the first must be deactivated.
GOAL of EXAMPLE: STEPS: INPUTS:
42
De-activate FLAPERON so that
ELEVON can be activated.
Where next?
Open the FLAPERON function.
De-activate the function.
Close function.
for 1 second.
(If basic, again.)
to FLAPERON.
to INH.
Set up ELEVON(see p. 45).
… 42 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba 7CAP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 7CAP in the language / languages: English as an attachment in your email.

The manual is 2,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Futaba 7CAP

Futaba 7CAP User Manual - Dutch - 13 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info