28993
56
Zoom out
Zoom in
Previous page
1/64
Next page
PI-N, I, H — Pitch Rate (Normal, Idle-Up, Hovering)
The Pitch Rate may be used to adjust the rotor pitch high-end pitch angle without having
to shut off the engine. When active, you may directly input the top-end ATV percentage. This
convenient function allows you to bypass the ATV menu, whose use would require that you
move the throttle stick above its halfway position to input numbers for its top end. As you might
imagine, this is very inconvenient with the engine running as it will cause the chopper to take
off!
Inputting Pitch Rate Values
1. Get to the
PI-N
screen with the up or
down arrow keys.
2. Use the
CURSOR
key to select the pitch
rate screen you wish to change.
Normal Idle-Up Hovering
The arrow’s position indicates the direction
of the pitch servo.
Low sideHigh side
3. Choose the amount of pitch rate with the
(+) or (–) keys. If you wish to return to
the original 100% value, press both keys
simultaneously.
4. Repeat this procedure for the pitch rate
settings on the other rate remaining.
HV-T — Hovering Throttle
The Hovering Throttle function may be used to trim the
throttle near hover without affecting pitch. This function is
handy to make up for changes in rotor speed caused by variations
in temperature, humidity, or other conditions. Changing the
percentage in the window moves the throttle curve above or
below the straight line as shown in the figure. Its value is stored
in the model memory so that when the model is recalled, the original setting is repeated. This
function is best used with the hovering pitch function, so that more exact trimming may be
carried out.
Throttle
Servo Response
Throttle Stick Motion
Low
Full
Pwr
Idle
Hover
Changing the HV-T
value moves the
Throttle response
above or below
the straight line
High
Working with Hovering Throttle
1. Press one of the
MODE SELECT
buttons
until the
HV-T
window appears. A flashing
percent indicator should appear.
– 51 –
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba 6XH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 6XH in the language / languages: English as an attachment in your email.

The manual is 1,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Futaba 6XH

Futaba 6XH User Manual - Spanish - 55 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info