28983
14
Zoom out
Zoom in
Previous page
1/24
Next page
14
14
3. Push SELECT key to call the screen for selecting channels to control MAS
MAS
(Master)
mixing. Then select the channel by pushing DATA INPUT lever . Channel 1 (aileron) in this
figure is assigned to the master.
4. Push SELECT key to call the screen for selecting channels to control
SLV
SLV
(Slave) mixing.
Then select the channel by pushing DATA INPUT lever. Channel 4 (rudder) in this figure is
assigned to the slave.
5. Press the SELECT key twice to display the flashing % sign. Use the DATA INPUT lever to
set the percentage of mixing from -100% to +100% (depending on the direction and distance
you wish the slave servo to move).
6. Observe how the controls on the model respond to be certain you have achieved the correct mix and that the throws are as
desired.
Wing Mixing Type Selection
Wing Mixing Type Selection
With the programmable mix (previously described) the user determines the two channels to be mixed. The wing mixing
function is another mix that may be used, but the channels mixed are predetermined. There are three different wing mixing
functions to select from:
FLPR Flaperon mixing
FLPR Flaperon mixing
This function allows the ailerons to be used both as ailerons and
and
as flaps. The
flap control dial (CH 6) operates the flap function. To use flaperon mixing both
ailerons must be operated by separate servos.
To activate flaperon mixing:
To activate flaperon mixing:
1. Connect the aileron servo in the right wing to channel 1 (aileron) in the
receiver and connect the aileron servo in the left wing to channel 6 (flaps) in
the receiver.
2. Enter the programming mode. Access the
FLPR
FLPR
screen with the MODE key.
You cannot set
Flaperon
Flaperon
mixing when Elevon
Elevon
mixing has already been set. In order to
enable
Flaperon
Flaperon
mixing, you first need to cancel Elevon
Elevon
mixing. However, it is allowed
to use “Flaperon” and “V-Tail” mixing simultaneously.
*If necessary, use the Servo Reversing
function to achieve the correct direction of
servo throws.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba 6EXAP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 6EXAP in the language / languages: English as an attachment in your email.

The manual is 2,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info