747925
121
Zoom out
Zoom in
Previous page
1/128
Next page
Log recording cycle
0.1~60s(
sec
)
0.1~10s(
sec
)0.1s step
10s~60s(sec)1s step
Initial value: 1.0
sec
Adjust button
- Adjust with the (+) and (-) but-
tons.
- Return to the initial value "0" by
pressing the (+) and (-) buttons
simultaneously for about 1 sec-
ond.
Log recording time
20s (seconds)~3h 20m (3
hours 20 minutes)
The maximum recordable time
set by CYCL is displayed auto-
matically.
Status display
RDY :
Throttle stick operation wait
STA :Logger running
STP : Logger stopped
Alarm
ON/OFF
ON, OFF
- Select with the (+) or (-) but-
tons.
121
Function
Telemetry "TELEMETRY"
1
(Log start operation)
-Start by switch (SW1)
When the switch (SW1) set by SW/dial func-
tion is pressed, data logging starts.
-Starting by throttle stick
Display the log setting (LOG MODE) screen
and select the "STATE" setting item using
(JOG) button up or down operation, and press
the (JOG) button for approximately 1 second.
Log function start/stop operation
2
(Recording cycle setting)
Select the "CYCL" setting item using (JOG)
button up or down operation, and set the data
acquisition interval from a minimum 0.1 sec-
ond to a maximum 60 seconds with the (+)
button or (-) button.
The maximum recordable time set by CYCL is
displayed at END TIME shown below.
3
(Count alarm ON/OFF)
Select the "ALRM" setting item using (JOG)
button up or down operation. To sound an
electronic beep at each log count, set "ALRM"
to ON with the (+) button or (-) button.
"OFF" : Alarm OFF
"ON" : Alarm ON at each log count
When completed, move the cursor to [RT] using the (JOG)
button, and return to the HOME screen by pressing the (JOG)
button twice.
An electronic beeping sound is generated and the "STATE" display switches from "RST"
to blinking "RDY", and the logger enters the stick operation wait state. When the stick
is operated in the forward direction, data logging begins. (STATE display "STA") When
the end time arrives, an electronic beep sounds and data logging stops. To return to the
HOME screen during data logging, move the cursor to [RT] using (JOG) button up or
down operation, and press the (JOG) button or (+) button.
2
(Log forced end)
To abort logging, press the switch (SW1), in the same way as starting, or display the log
setting (LOG MODE) screen and select the "STATE" setting item using (JOG) button up
or down operation and press the (JOG) button for approximately 1 second. An electronic
beeping sound is generated and logging is stopped.
121


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba 4GRS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 4GRS in the language / languages: English as an attachment in your email.

The manual is 2,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info