747925
114
Zoom out
Zoom in
Previous page
1/128
Next page
5:5
7:3
Neutral Adjuster
(Throttle stick)
114
Function
Adjuster "ADJUSTER"
(Preparation)
On the ADJUSTER screen, select the setting item "THROT-
TLE" using the (JOG) button, and press the (JOG) button.
Throttle adjustment will not be made if it has been converted
to ratchet operation.
It is necessary to return to a self neutral.
Throttle adjustment
.H\
&$1&(/
$'-867(5
7+5277/(
1
.H\
&$1&(/
$'-867(5
7+5277/(
1
1
.H\
&$1&(/
$'-867(5
7+5277/(
1
1
%5.
):'
.H\
&$1&(/
$'-867(5
7+5277/(
1
1
%5.
):'
fig-1
fig-3
fig-2
fig-4
1
(Throttle 5:5
neutral adjustment )
Neutral adjuster is set to 5:5 by the Neutral Adjuster switch.
In the 5:5 neutral setup screen (fig-1) state, pull the stick
back slightly then allow to return to neutral and press the
(JOG) button whilst ensuring the stick is not touched.
2
(Throttle 7:3
neutral adjustment )
Neutral adjuster is set to 7:3 by the Neutral Adjuster switch
.
In the 7:3 neutral setup screen (fig-2) state, pull the stick
back slightly then allow to return to neutral and press the
(JOG) button whilst ensuring the stick is not touched.
Note that both the 5:5 and 7:3 neutral adjustment procedures
have to be completed as part of the set-up process. Once
complete the required option should be selected.
3
(Throttle throw adjustment)
In the throw setup screen state (fig-3), gently move the stick
fully to the brake side and the forward side and when button
mark (fig-4) is displayed, pressing the (JOG) button.
Internal check is performed automatically. When each adjust-
ment point is within a fixed range, correction is performed
and “COMPLETE!” (fig-5) is displayed.
If an adjustment point is not within a fixed range, correction
is not performed and the correction data is not updated.
When button mark is not displayed even though correction
was performed again, please contact a Futaba Radio Control
Customer Center.
4
When completed, return to the ADJUSTER screen by press-
ing the (JOG) button.
5
Next, move the cursor to [RT] using the (JOG) button, and press
the (JOG) button.
.H\
&$1&(/
$'-867(5
7+5277/(
1
1
%5.
):'
&203/(7(
fig-5
114


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba 4GRS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 4GRS in the language / languages: English as an attachment in your email.

The manual is 2,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info