28973
22
Zoom out
Zoom in
Previous page
1/39
Next page
2020
2020
20
Description of Functions
3PDF
Description of Functions
Steering Trim
The steering neutral position can be adjusted by moving
the steering trim lever to left or right.
Use this function to make your model run in a straight
line.
1At the initial screen where the Model number and
Voltage are displayed the Steering Trim setting
can be viewed by pressing the Trim lever to the
left or right. If the Steering trim is not operated
for 5 seconds the display will return to the initial
screen.
-When the SYSTEM MODE GROUP is displayed the steering trim posi-
tion will be displayed.
Racers Tip
Adjust the servo horn and linkage so they are parallel. If
you are using a servo saver be sure the Steering trim is as
close to neutral as possible. Check the transmitter steer-
ing trim and be as close to 0 as you can. Also check the
instruction manual of the model this system is to be in-
stalled in for the correct servo position.
Trim Operation and Maximum Travel
Trim adjustments will change the servo movement
range. When you make large trim adjustments recheck
your maximum servo travel. (Steering ATV Right side
and Left side)
When Trim Adjustments are Large
When the trim adjustments have caused the neutral to
shift considerably to the left or right you may need to
readjust the linkage.
Steering Trim
Lever
90°
Servo Saver
Parallel
90°
Direct Servo
Saver Horn
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba 3PDF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 3PDF in the language / languages: English as an attachment in your email.

The manual is 0,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info