747923
7
Zoom out
Zoom in
Previous page
1/30
Next page
8
Safety Precautions
Make all adjustments to the radio control system with engine not running, or the electric motor
disconnected.
If the engine is running or the motor is connected while adjustments are made, the model may run
out of control.
Remove the main battery source from electr ic powered models when they are not being used.
Should you accidentally leave the receiver switch on, the model could r un out of control.
(Fail safe function)
Before running (cr uising), check the fail safe function.
Check Method:
Before star ting the engine, check the fail safe function as follows:
1. Tur n on the transmitter and receiver power switches.
2. Tur n off the transmitter power switch.
3. Check if the fail safe function moves the ser vos to the preset position when reception fails.
The fail safe function is a safety feature that minimizes set damage by moving the ser vos to a preset
position when reception fails. However, if set to a dangerous position, it has the opposite effect.
Setting example:
Throttle idle or brake position
CAUTION
Do not touch the engine, motor, speed control or any par t of the model that will generate heat while
running.
Touching hot par ts will result in ser ious burns.
When the charger is not in use, disconnect it from the outlet. This will prevent accidents, overheating
and shor t circuits.
Storage and Disposal Safety Precautions
WARNING
At the end of a day's operation, store the system with Ni-Cd/Ni-MH battery discharged. Be sure to
recharge the system before it is used again.
You should fully discharge your system's batteries periodically to prevent a condition called "memor y".
For example, if you only make two r uns in a day or you regularly use a small amount of battery's ca-
pacity, the memor y effect can reduce the actual capacity even if the battery is charged for the recom-
mended amount of time.
Do not throw a Ni-Cd/Ni-MH battery into a fire. Do not disassemble or attempt to repair a Ni-Cd/Ni-
MH batter y pack.
Overheating, damage and acid leakage may lead to burns, loss of eye sight as well as numerous
other types of injuries. The electrolyte in Ni-Cd/Ni-MH batteries is a strong alkali. Should you get even
the smallest amount of the electrolyte in your eyes, Do Not rub. Wash immediately with water, and
seek medical attention at once. The electrolyte can cause blindness. If electrolyte comes in contact
with your skin or clothes, wash with water immediately.
Do not leave the radio system or models within the reach of small children. A small child may acciden-
tally operate the system. This could cause a dangerous situation and injur ies. Ni-Cd/Ni-MH batteries
can be very dangerous when mishandled and cause chemical damage.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba 2HR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 2HR in the language / languages: English as an attachment in your email.

The manual is 1,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info