29031
124
Zoom out
Zoom in
Previous page
1/127
Next page
EXP1 curve adjustment
Rate A and Rate B can be adjusted separately
or simultaneously. The EXP curves rate (EXP
A, EXP B) can also be adjusted separately or
simultaneously.
[Setting modes]
*[Separate] mode: Rates are adjusted
separately.
*[Combined] mode: Rates are adjusted
simultaneously.
[Setting method]
1. Select the setting mode.
2. Touch the button of the rate or EXP curve
rate your want to set.
3. Use the adjustment buttons to set the rate.
*Initial value: +100.0% (rate), +0.0 (EXP rate)
The curve can also be horizontally offset in the
vertical direction.
[Offsetting the curve horizontally in the vertical
direction]
1. Touch the Offset button.
2. Use the adjustment buttons to move the
curve horizontally up or down.
*Initial value: +0.0
(EXP1 curve)
Using the EXP1 curve is helpful in
smoothening starting of the ailerons,
elevators, rudder, etc.
(EXP2 curve)
Using the EXP2 curve is helpful in engine
rise and other engine control.
VTR curve adjustment
Rate A and Rate B can be adjusted separately or
simultaneously. The VTR curve point positions (P.
Pos. A, P. Pos. B) and rates (P. Rate A, P. Rate B)
can also be adjusted separately or simultaneously.
[Setting modes]
*[Separate] mode: Positions and rates are
adjusted separately.
*[Combined] mode: Positions and rates are
adjusted simultaneously.
[Setting method]
1. Select the setting mode.
2. Touch the button of the rate or VTR curve
point position (or rate) you want to set.
3. Use the adjustment buttons to set the VTR
curve point position (or rate).
*Initial values: +100.0% (Rate), -50.0% (P.Pos.A),
+50.0% (P.Pos.B), +0.0% (P. Rate)
The curve can also be offset horizontally in the
vertical direction.
[Offsetting the curve horizontally in the vertical
direction]
1. Touch the Offset button.
2. Use the adjustment buttons to move the
curve horizontally up and down with the
adjustment buttons.
*Initial value: +0.0%
(VTR curve)
Setting is fast if left, right, up, and down
are rst decided in the Combined mode
and the mode is then switched to the
Separate mode.
When this curve is used when the
operating rudder angle is large such as
with acrobatic models, switching from
normal ight to acrobatic rudder angle is
performed without switch operation.
124
<Data>
124


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba 14MZ at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 14MZ in the language / languages: English as an attachment in your email.

The manual is 21,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info