Manual Futaba 14MZ (page 108 of 127) (English)

29031

108

Zoom out

Zoom in

1/127

PIT Curve/Pitch Trim

PIT Curve

This function adjusts the pitch operation curve

for each ﬂ ight condition for the optimal ﬂ ight state

relative to movement of the throttle stick.

The pitch curve can be freely selected from linear operation

curve to smooth curve, and adjusted to match the curve

you want by means of the T14MZʼs powerful Curve Edit

Function (6 types of curves can be selected). Up to 17 points

can be set for linear or curve types. However, when using

the 3 points or 5 points speciﬁ ed to create a curve, a simple

and smooth curve can be created by selecting the curve type

and reducing the number of input points to 3 or 5, and then

entering the specified value at the corresponding points

that you created.a curve, a simple and smooth curve can be

created by selecting the curve type and reducing the number

of input points to 3 or 5, and then entering the specified

value at the corresponding points that you created.

● Return to Model Menu

● Touch the [PIT Curve] button in the Model Menu to

call the setup screen shown below.

● There are 4 types of display. The curve of all the

conditions or the pitch and throttle curves can be

displayed on one screen.

● Linear type is 9 points, but for

simple use, 4~5 points are

sufﬁ cient.

● Normally use Separate.

● Trim can be used

as hovering pitch

and pitch trim.

The high and low

side pitch can

be ﬁ ne-tuned.

● Units can be selected from [%] and [Deg]. When [Deg] is

selected, the rotor pitch angle is displayed and becomes the

setting standard. When [Deg] was selected, the high, center,

and low pitch angles are enterd.

● Can be copied to the pitch trim adjustment position.

● When the [Angle] button is touched, the pitch angle input

screen is displayed. Input the maximum pitch, center, and low

pitch.

Normal curve adjustment

● For normal curve, usually use [Line] type and

create a basic pitch curve centered about

hovering. Use this function together with the

THR Curve (Normal) function and adjust the

curve so that up/down control is best at a

constant engine speed.

Idle up curve adjustment

● For the high side pitch curve, set the

maximum pitch which does not apply a

load to the engine. For the low side pitch

curve, create curves matched to loop, roll,

3D, and other purposes and use the idle up

curves according to the performance.

Note: When the curve type is changed, the data is

reset.

Throttle hold curve adjustment

● The throttle hold curve is used when

executing auto rotation dives.

Operation precautions

WARNING

When actually starting the engine and

flying, always set the idle up condition

switch to [OFF] and start the engine in the

idling state.

108

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 14MZ in the language / languages: English as an attachment in your email.

The manual is 21,67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Futaba 14MZ Manual

Product: