29031
99
Zoom out
Zoom in
Previous page
1/127
Next page
Return to Model Menu
Gyro
[Corresponding model type]: Airplane/glider, general
This function is used when a GYA Series gyro
is used to stabilize the fuselage attitude. The
sensitivity and operation mode (Normal mode/GY
mode) can be switched with a switch.
Three rates (Rate 1/Rate 2/Rate 3) can be
switched.
Up to 3 axes (Gyro/Gyro 2/Gyro 3) can be
simultaneously controlled.
*Initial setting does not assign a sensitivity channel. Use the
Touch the [Gyro] button in the Model Menu
to call the setup screen shown below.
Function menu of the Linkage Menu to assign the sensitivity
channel (Gyro/Gyro2/Gyro3) used to a vacant channel
beforehand.
Set [ACT] and [Trim] other than Function to [NULL].
The operation mode (AVCS/NOR) and sensitivity of
the 3 axes Gyro/Gyro2/Gyro3 can be set.
Group/single mode switching
(Gr./Sngl)
(For more information, see the description
at the back of this manual.)
Three rates (Rate 1/Rate 2/Rate 3) can be used.
Touch the ACT button of the rate to be used, and set the function to
ACT ([ON] or [OFF]).
When a Futaba GYA gyro is used, when [GY] type is s elected, the
sensitivity set value is directly read in both the AVCS and NOR modes.
When setting a switch, touch the switch button to call the <Switch>
screen, and then select the switch and set its ON direction.
(For a description of the switch selection method, see the description at
the end of this manual.)
(Example) Setting 3 axes using a GYA351 and GYA352 (2 axes gyro)
Wing type: Aileron 2 servos mounted fuselage selected
Set Gyro 1 (GYA351): CH7, Gyro 2 (GYA352): CH8, Gyro 3 (GYA352): CH9 at the
Function menu of the Linkage Menu.
Rate 1 [OFF][GY][SW-E][NOR][60%][NOR][60%][NOR][60&][Gr]
Rate 2 [INH][GY][NULL][AVCS][0%][AVCS][0%][AVCS][0%][Gr]
Rate 3 [OFF][GY][SE-E][AVCS][60%][AVCS][60%][AVCS][60%][Gr]
*When separating the conditions, set to [Sngl].
*Set so that Rate 1 is turned on at the back position of switch E and Rate 3 is turned ON at the
front position.
Since switch E is turned OFF at the center, Rate 2 remains [INH].
99
<Model Menu (Airplane/Glider Functions)>
99


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba 14MZ at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 14MZ in the language / languages: English as an attachment in your email.

The manual is 21,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info