29031
93
Zoom out
Zoom in
Previous page
1/127
Next page
Butter y
[Corresponding model type]: Glider, 2 ailerons or more
This function allows powerful brake operation
by simultaneously raising the left and right
ailerons and lowering the flaps (camber flap,
brake ap).
This setting will allow the ailerons to be raised
while the flaps are simultaneously lowered.
Butter y (Crow) produces an extremely ef cient
landing configuration by accomplishing the
following:
1. Slow the aircraft’s velocity.
2. Provide washout at the wing tips to reduce
the tendency to tip stall.
3. Create more lift toward the center of the
wing allowing it to y at a slower speed
Mixing during ight can be turned ON/OFF by
setting a switch. (Always ON at NULL setting)
The butter y operation reference point can be
offset. When the Offset button is touched when
operated to the position to be changed, the
reference point is offset. If the reference point is
offset too much, unexpected operation may be
performed.
The ailerons, aps, and elevators operation speed
can be adjusted. (IN side/OUT side)
A delay can be set for each condition. A cut
switch which can turn OFF the delay function can
also be set.
The differential rate can be adjusted.
*When servo binding occurs when setting the ailerons and
aps in butter y mixing, use the AFR function to adjust the
rudder angle.
Return to Model Menu
When offsetting the butterfly operation
reference point, operate to the point you
want to change and then touch the Offset
button. The reference point displays 0%.
When [Yes] is touched, the reference point is
changed.
Differential rate
adjustment
To elevator correction
setup screen
Calls the Butter y AFR (D/R) setup screen
(For a description of the setting method, see the description at
the back of this manual.)
Aileron and ap servos speed
setting
(For a description of the setting method,
see the description at the back of this
manual.)
Condition delay setting and cut
switch setting
(For a description of the setting method, see the
description at the back of this manual.)
Group/single mode switching
(Gr./Sngl)
(For more information, see the description
at the back of this manual.)
Touch the Mixing Rate AIL and
FLP buttons and adjust the
mixing rates.
Touch the [Butter y] button in the Model Menu
to call the setup screen shown below.
(The display screen is an example. The actual screen depends
on the model type. The screen shown below is for 4 ailerons
and 4 aps.)
Touch the ACT button and set the function to
ACT (ON).
When setting a switch, touch the SWITCH
[NULL] button to call the <Switch> screen, and
then select the switch and set its ON direction.
93
<Model Menu (Airplane/Glider Functions)>
93


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba 14MZ at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 14MZ in the language / languages: English as an attachment in your email.

The manual is 21,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info