29031
89
Zoom out
Zoom in
Previous page
1/127
Next page
Return to Model Menu
Camber Mix
[Corresponding model type]: Airplane/glider, 2 ailerons or more
This function adjusts the AFR (D/R) rate
of camber operation which operates the wing
camber (ailerons, camber flaps, brake flaps) in
the negative and positive directions. The aileron,
flap, and elevator rates can also be adjusted
independently by curve, and attitude changes
caused by camber operation can be corrected.
*Initial setting assigns camber operation to side lever LST.
The up/down side rates of the aileron, ap, and
elevator servos can be adjusted by curve. When
the mixing direction is reversed by the linkage,
adjustments can be made by changing the
mixing rate polarity.
Touch the [Camber Mix] button in the Model Menu to call the setup
screen shown below.
*The display screen is an example. The actual screen depends on the model type.)
Mixing during ight can be turned ON/OFF by
setting a switch. (Always ON at NULL setting)
A delay can be set for each condition. A cut
switch which can turn OFF the delay function can
be set.
The speed of the aileron, ap, and elevator servos
can be set. (IN side/OUT side)
Condition delay cut switch
Condition delay setting
Group/single mode switch (Gr./Sngl)
(For more information, see the description at the
back of this manual.)
Camber AFR (D/R) setup screen call
(For a description of the setting method, refer to the
AFR function.)
(Curve/rate setup screen)
Mixing curve setting
(For a description of the curve setting method, see the
description at the back of this manual.)
Servo speed setting
(For a description of the setting method, see the
description at the back of this manual.)
Overall
adjustment
by Rate A
and Rate B
Aileron rate adjustment
89
<Model Menu (Airplane/Glider Functions)>
89


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba 14MZ at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 14MZ in the language / languages: English as an attachment in your email.

The manual is 21,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info