29031
80
Zoom out
Zoom in
Previous page
1/127
Next page
MODEL MENU (AIRPLANE/GLIDER FUNCTIONS)
The dedicated mixings, etc. usable when
airplane, glider, or EP glider model type is
selected are displayed in this Model Menu
functions section. First use the Model Type
function of the Linkage Menu to preset the model
type, wing type, and tail type matched to the
fuselage used. Later setting resets the data set by
mixing function, etc.
These dedicated mixings can be set for each
flight condition, as required. When you want to
use the system by switching the settings for each
condition by switch or stick position, use the
Condition Select function to add ight conditions.
(Up to 8 conditions can be used)
Note: The T14MZ is designed so that the airplane
and glider (including EP glider) model types can
handle fuselages of the same wing type.
The functions common to airplanes and gliders,
except some dedicated functions, are summarized
without regard to the model type.
The setting items are different, depending on the
number of servos, etc. according to the wing type
used. However, reread them. The setup screens in
the instruction manual are typical examples.
Return to Home screen
Touch the Model Menu button of the Home screen to
call this Model Menu.
When the button of the function you want to set is
touched, a setup screen appears.
(Model Menu screen example)
*The Model Menu screen depends on the model type. This screen is for model type 4AIL+4FLP.
To next page
Model Menu functions list
AIL Differential
This function adjusts the left and right ailerons.
Roll axis correction and ne tuning with a VR are
also possible. This is convenient when making
settings during ight.
[Airplane/glider, 2 ailerons or more]
Flap Setting
The aps can be adjusted independently. For a
4 aps model, the camber aps can be mixed with
the brake aps. [Airplane/glider, 2 aps or more]
AIL to Camber FLP
This mixing operates the camber flaps in
the aileron mode. It improves the operation
characteristic of the roll axis. [Airplane/glider, 2
ailerons + 2 aps or more]
AIL to Brake FLP
This mixing operates the brake flaps in
the aileron mode. It improves the operation
characteristic of the roll axis. [Airplane/glider, 4
aps or more]
AIL to RUD
This mixing is used when you want to operate
the rudder at aileron operation. Banking at a
shallow bank angle is possible. [Airplane/glider, 2
ailerons + 2 aps or more]
Airbrake to ELE
This mixing is used to correct operation of
the airbrakes (spoilers) when landing. [Airplane/
glider, general]
RUD to AIL
This mixing is used to correct roll maneuvers,
knife edge, etc. of stunt planes. [Airplane/glider,
general]
80
<Model Menu (Airplane/Glider Functions)>
80


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba 14MZ at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 14MZ in the language / languages: English as an attachment in your email.

The manual is 21,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info