29031

Futaba 14MZ Manual

72
Zoom out
Zoom in
Previous page
1/127
Next page
MODEL MENU (COMMON FUNCTIONS)
This section describes the AFR, program mixing,
and other functions common to all model types.
Before setting the model data, use the Model
Type function of the Linkage Menu to select the
model type matched to the fuselage. When another
model type is selected thereafter, the AFR, program
mixing, and other setting data are reset.
The functions in the Model Menu can be set for
each flight condition. When you want to use the
system by switching the settings for each condition
by switch, stick position, etc., use the Condition
Select function to add flight conditions. (Up to 8
conditions can be used)
Note: The T14MZ is designed so that the airplane
and glider (including EP glider) model types are
compatible with fuselages of similar type wings.
This section outlines the relationship between the
functions common to airplanes and gliders, except
some dedicated functions, and model type.
The setting items depend on the number of servos
and other differences according to the wing type
used, but reread them. The setup screens in the
instruction manual are typical examples.
●Return to Home screen
● Touch the Model Menu button of the Home screen to call the
Model Menu.
● When the button of the function you want to set is touched, a
setup screen appears.
(Model Menu screen example)
*The Model Menu screen depends on the model type. This screen is for model type 4AIL+4FLP.
●To next page
Model Menu functions (Common) list
●Servo Monitor
Servo test and servo position display (For a
description of its functions, see the Linkage Menu
section.)
●Condition Select
Flight conditions addition, deletion, copy,
condition renaming, and condition delay can be set.
●AFR (D/R)
Sets the rudder angle and curve of all the
operation functions. A D/R curve which can be
switched with a switch, etc. can also be added.
●Prog. Mixes
Program mixing which can be freely customized.
Up to 10 mixes can be used for each condition.
●Fuel Mixture
Mixing used in needle adjustment of engines
which use a fuel mixture control carburetor.
[Airplane, helicopter]
72
<Model Menu (Common Functions)>
… 72 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba 14MZ at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 14MZ in the language / languages: English as an attachment in your email.

The manual is 21,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info