29031
14
Zoom out
Zoom in
Previous page
1/127
Next page
•Antenna storage
When you store the transmitter in the carrying
case, detach the antenna and store it in the antenna
compartment in the transmitter.
Antenna Compartment
Cover
•Angle adjustment of the antenna
You can change the angle of the antenna, as
you like. Use 2.5mm hexagonal wrench to turn
counterclockwise to release the screw on the left
of the antenna holder, and change the angle of the
antenna, as you like, then retighten.
Screw
LED monitor
The color of the FUTABA logo mark shows the
status of the transmitter.
(LED Display)
• When you turn on the transmitter, FUTABA
logo shows different colors, and then the
color stays constantly pink. The FUTABA
logo blinks green very rapidly while internal
processing is carried out after the power is
turned on. Once the internal processing is
over, the logo turns to pink color.
• The FUTABA logo turns on blue when you
use DSC cable, or when no is selected for
transmit. when the trainer function is set at
student's side.
• The FUTABA logo blinks red slowly when you
attach the RF module that is different from
the setting.
• Under the normal usage (, that is, radio wave
is being emitted), the FUTABA logo turns on
green.
Switch reallocation
You can reallocate the toggle switches on the
shoulders of the transmitter, as you like.
(Default settings)
• SA : 3 positions; Alternate; Short lever
• SB : 3 positions; Alternate; Long lever
• SC : 3 positions; Alternate; Long lever
• SD : 3 positions; Alternate; Short lever
• SE : 3 positions; Alternate; Short lever
• SF : 2 positions; Alternate; Long lever
• SG : 2 positions; Alternate; Short lever
• SH : 2 positions; Momentary; Long lever
*You can choose switch and set the ON-direction in the
setting screen of the mixing functions.
•When you change switches:
Screw
To relocate switches;
1. Make sure your transmitter is off, and use the
attached 2.5mm hexagonal wrench (inside
stylus) to turn the screw counter-clockwise on
the switch block and detach the block.
14
<Before Use>
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba 14MZ at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 14MZ in the language / languages: English as an attachment in your email.

The manual is 21,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info