29029
121
Zoom out
Zoom in
Previous page
1/127
Next page
121
<Data>
Servo speed setting (1)
The servo speed at each function operation
(including flight condition switching) can be
adjusted. The servos operate smoothly at a
¿[HGVSHHGFRUUHVSRQGLQJWRWKHVHWVSHHG7KH
operating speed (IN side) and return speed (OUT
side) can be set individually.
Switch the operation mode according to the
set function.
"SYMMET" mode: Mode used with ailerons
and other self neutral functions.
"LINEAR" mode: Mode used with functions
which hold the operation position of the
throttle and switch channel, etc.
[Setting method]
1. Use the cursor lever to move the cursor
(reverse-video) to the [MODE] item.
2. Turn the data input dial to the left or
right and switch to the operation mode
("SYMMET" or "LINEAR") corresponding to
the set function.
3. Move the cursor to the direction ([IN] or
[OUT]) side you want to set.
4. Turn the data input dial to the left or right
and set the speed.
Initial value: 0
Adjustment range: 0~27 (maximum delay)
(When the enter button is pushed for 1 second, the servo
speed is reset to the initial value.)
Servo speed setting (2)
3URJUDPPL[LQJ
The operation start point at operation (IN
side) and return (OUT side) can also be set by
servo speed setting (1) function.
[Setting method]
*Perform the [SPEED] item the same as [Servo speed
setting (1)]. Set [DELAY] (operation start point) by the
following method:
1. Use the cursor lever to move the cursor
(reverse-video) to the [START] item.
2. Turn the data input dial to the left or right
and set the delay from switch ON to the
start of function operation.
Initial value: 0.0sec
Setting range: 0 to 9 sec
(When the enter button is pushed for 1 second, the servo
speed and delay are reset to the initial values.)
3. Use the cursor lever to move the cursor
(reverse-video) to the [STOP] item.
4. Turn the data input dial to the left or right
and set the delay time from switch OFF to
the start of function operation.
Initial value: 0.0 sec
Setting range: 0 to 9 sec
(When the enter button is pushed for 1 second, the servo
speed and delay are reset to the initial values.)
Operations related to servo speed
121


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba 12Z at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 12Z in the language / languages: English as an attachment in your email.

The manual is 4,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info