29029

Futaba 12Z Manual

24
Zoom out
Zoom in
Previous page
1/127
Next page
24
<Basic Operation>
is displayed and the frequency data is sent to the receiver
together with a message sound. (The frequency data can be
resent by selecting [RETRY] and pushing the enter button.)
8. Turn on the receiver power while the new
frequency data above is displayed.
*When receiver frequency setting is complete, the receiver
monitor LED blinks once and the CH1 servo shuttles 3
times across the neutral position.
*The new receiver frequency data uses very low power whose
frequency is different from that of frequency channel used.
When setting the receiver frequency, bring the transmitter
and receiver as close together as possible.
*If the new data is not read correctly due to the ambient
conditions, extend the transmitter antenna and bring the
transmitter close to the receiver antenna and repeat steps 5
through 7.
*The frequency can also be changed by connecting the
transmitter and receiver directly with the DSC cord and
performing steps 5 through 8.
*When the receiver ID code is incorrect, the monitor LED
will blink. Return to the receiver ID setup screen and reset
the receiver ID.
9. When frequency setting is complete, move
the cursor to the [END] position and push the
enter button.
10.A confirmation message ("TRANSMIT?") is
displayed. To send on the new frequency,
select [YES] and push the enter button.
*To not transmit, select [NO] and push the enter button.
In case of using PCM1024, PPM receivers
*Make sure that PCM1024 or PPM is set as a modulation
scheme. Then change the frequency by the following
instruction.
How to change the frequency
7XUQRQWKHWUDQVPLWWHUSRZHU$FRQÀUPDWLRQ
message ("TRANSMIT?") is displayed. Since
you do not want to transmit, select [NO] and
then push the enter button.
2. Select [FREQUENCY] of the area that displays
the frequency on the home screen or in the
linkage menu and push the enter button.
*The frequency setup screen appears.
﷈ﶰ﷊ﶲﶪ﷊ﶸ﷎ﶢ
ﴶﴸﴸﳜ
﷐﷒ﶸ﷌ﵺﶸﶶﵾﶈ﷈ﶰ﷊ﶲﵾ﷎ﷄﶆﶞ
ﻚｄＸﻚﻨＸｂﻞｄ｀ｆ：Ｄ＀ﻦ
Ｘｂ：Ｄ＀
ﶺﶶ﷌ﶪﶼ﷒ﶬﷂﶶﶸﵺﵺﵺﵺﵺﵺﵺﶞ
﷈ﶰ﷊ﶲﵾ﷐﷒ﶸ﷌ﶞﵼﵺ﷒ﶰ﷊﷒ﵺﶞ
＠Ｒ４Ｒ８
４Ｎ：ｄｆｂ＾
ﶺﶶ﷌﷊ﶼ﷤
﷎ﶶﶸ﷌ﷂﶬ﷤
ﴶﴸﳰﴶﴸﳰﴸﴸ
3. When switching the frequency, select [BAND
NO.] and push the enter button.
*The frequencies which can be selected appear on the screen.
4. Select the frequency you want to use and
push the enter button.
$FRQ¿UPDWLRQPHVVDJHDSSHDUV
5. If the frequency is correct, push the enter
button.
6.A confirmation message ("TRANSMIT?") is
displayed. To send on the new frequency,
select [YES] and push the enter button.
*To not send, select [NO] and push the enter button.
Registration of the user's name
T12Z transmitter can register user's name.
How to register user's name
1. Turn on the power of the transmitter.
2. Select [USER NAME] of the area that displays
the user's name on the home screen or in the
system menu and push the enter button.
*The user name set up screen appears.
ﶪﶮ﷊ﶰﵺﶸ﷒ﶺ﷊
ﶮ﷊ﶼ﷊﷎ﶬﶞ
＊．Ｊ０ﻚ８Ｒ：Ｊ
ﴶﴸﴸﳜ
ＢＬﻚ８＊：ＰＪ０
．ＪＮ＊０Ｊﻚ：６ＬＪ
ﶺﶶ﷌﷊ﶼ﷤
﷎ﶶﶸ﷌ﷂﶬ﷤
ﴶﴸﳰﴶﴸﳰﴸﴸ
3. Select [USER NAME] and push the enter
button. Then the set up screen will pop up.
You can use up to 12 characters as a user's
name.
ﶪﶮ﷊ﶰﵺﶸ﷒ﶺ﷊
ﴶﴸﴸﳜ
ﹶ﹘﹚ﺀﹾﺀ︨ﹼ﹤﹞﹢
Ｈ＊，ＲＰＲ Ｎ６０４ﻚﻚ
Ｊ８，Ｊ０
ﴌﴈﳺﴔﴊﴘﳌﴠﳼﴂﴀﴈﴂﳰ
ＲＰＮＬＪＨＦＤＢ＠＞＜
：８６４２０．，＊（＆＄
＂＀ｆｄｂ｀＾＼ＺＸＶＴ
ﻜﻞﻬ﻾ﻤﻠﻢ
ﺘ ﺖ
ﶺﶶ﷌﷊ﶼ﷤
﷎ﶶﶸ﷌ﷂﶬ﷤
ﴶﴸﳰﴶﴸﳰﴸﴸ
*For a description of the user's name registering: p.33.
4. Push "Return" key to return to the previous
screen after entering the user's name.
(If you want to protect the user's name)
If you don't want anybody else to change your
user's name, set your ID.
*Please be aware that you will not able to change user's name
if you forget your password.
*For a description of the user's name protection method: p.33.
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba 12Z at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 12Z in the language / languages: English as an attachment in your email.

The manual is 4,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info