Manual Fusion MS-RA70 (page 6 of 12) (English)

691371

Zoom out

Zoom in

1/12

The stereo is compatible with Android

™

devices that support the

Android Open Accessory (AOA) protocol.

NOTE: The stereo is not compatible with Android devices in

MTP or PTP mode. See the instructions for your Android device

to connect using AOA, if necessary.

The stereo is compatible with media players and other USB

mass storage devices, including USB flash drives. Music on

USB drives must meet these conditions:

• The USB mass storage device must be formatted using the

FAT32 file system.

• The music files must be formatted as MP3 files.

• Each folder on the storage device can contain a maximum of

250 MP3 files.

Connecting a USB Device

You can connect a USB device to the USB port on the stereo.

Locate the USB port on the back of the stereo.

Connect the USB device to the USB port.

Select the USB source.

Connecting an Auxiliary Device

You can connect various auxiliary devices to the stereo. These

devices have either RCA connectors, a line output, or a

headphone output jack.

Locate the auxiliary connectors on the wiring harness.

If necessary, connect an RCA-to-3.5 mm adapter cable to the

auxiliary device.

Connect the auxiliary device to the RCA connectors on the

wiring harness.

Adjusting the Gain for the Auxiliary Device

You can adjust the gain for the connected auxiliary device to

achieve a volume level similar to that of other media sources.

You can adjust the gain in 1 dB increments.

Select an auxiliary source.

Select an option:

• To increase the gain, select .

• To decrease the gain, select .

Auxiliary Device Recommended Gain

Setting(dB)

Portable media player with headphone

output

from -9 dB to -6 dB

CD/DVD player with line output -6 dB

Portable media player with line output 0 dB

Game console with line output 0 dB

Older audio/visual equipment with line

output (for example, VHS or cassette

deck)

from 6 dB to 9 dB

NOTE: To achieve the best audio quality when using a

portable media player with headphone output, it may be

necessary to adjust the volume control on the media player,

instead of adjusting the gain.

Connecting the Stereo to a Garmin

Watch

For a list of a compatible Garmin watches, go to

www.fusionentertainment.com/marine.

For more information about the watch, see the watch manual at

www.garmin.com/manuals.

Following the instructions in the watch manual, install the

FUSION-Link

™

app from the Connect IQ

™

store onto the

watch.

On the stereo, select the BT source.

Select > DISCOVERABLE.

The stereo remains discoverable for two minutes.

Bring the watch within 3 m (10 ft.) of the stereo.

NOTE: Stay 10 m (33 ft.) away from other ANT

devices

while pairing.

Open the FUSION-Link app on the watch.

The first time you open the app on the watch, the watch

automatically pairs with and connects to the stereo. If you

need to pair to another stereo, in the FUSION-Link app,

select Settings > Pair new.

Control the audio playback using the FUSION-Link app on

the watch.

After the devices are paired, they connect automatically when

they are turned on, within range, and the app is open on the

watch.

Adjusting the Volume

Use the dial to adjust the volume.

If necessary, press the dial to switch between zones.

TIP: To control all zones at the same time, press the dial until

all zones are highlighted.

Adjusting the Tones

Select > SETTINGS > TONE.

Use the dial to adjust the level.

Press the dial to switch to a different tone.

Speaker Zones

You can group speakers in one area into speaker zones. This

enables you to control the audio level of the zones individually.

For example, you could make the audio quieter in the cabin and

louder on deck.

Zones 1 and 2 are powered by the on-board, Class AB amplifier.

To use the two line outputs and the two subwoofer outputs, you

must connect external amplifiers.

You can set the balance, volume limit, and name for each zone.

You can set the subwoofer level for zone 1.

Setting up Speaker Zones

Select > SETTINGS > ZONE.

Select a zone.

Select one or more options:

NOTE: Not all options are available for all zones.

• To link zones 1 and 2, select LINK TO ZONE 1 to fill the

option button (zone 2 only).

• To adjust the right and left speaker balance of this zone,

select BALANCE, and use the dial to set the balance.

• To limit the maximum volume output of this zone, select

VOLUME LIMIT, and use the dial to set the limit.

• To set the subwoofer filter, select SUB FILTER, and use

the dial to set the filter (zone 1 only).

• To set the subwoofer level, select SUB LEVEL, and use

the dial to set the level (zone 1 only).

TIP: To open the subwoofer level from any screen, press

and hold the dial for three seconds.

• To give the zone a specific name, select SET ZONE

NAME (Entering Text, page 1).

Linking Zones

Select > SETTINGS > ZONE > ZONE 2.

Select LINK TO ZONE 1 to fill the button.

When zones 1 and 2 are linked, appears between zones 1

and 2 on the volume screen.

Adjusting the Subwoofer Filter

You can use the subwoofer filter setting to control the subwoofer

cutoff frequency, which can enhance the blend of the sound

produced by the speakers and the subwoofer. Audio signals

2 Getting Started

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fusion MS-RA70 in the language / languages: English as an attachment in your email.

The manual is 1,4 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Fusion MS-RA70

Fusion MS-RA70 User Manual - German - 14 pages

Fusion MS-RA70 User Manual - Dutch - 14 pages

Fusion MS-RA70 User Manual - French - 14 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fusion MS-RA70 Manual

Product: