522161

Fusion MS-RA50 Manual

8
Zoom out
Zoom in
Previous page
1/16
Next page
88
SIGNAL
STRENGTH
TUNING
MODE
SOURCE NAME
SELECTED
FREQUENCY
ADJUSTING VOLUME LEVEL
To adjust the volume level:
MUTING OUTPUT
To mute and unmute the volume:
Turn Encoder Turn Encoder to
adjust.
The Volume
screen is
displayed
Press Menu to exit.
See “Menu Key
Operation” on page 5.
Figure 1 – Example source screen (AM input selected)
Mute
• PresstheMutekeytomutetheaudiooutput.TheMuteiconisdisplayedoverthe
top of the current input source screen.
• PresstheMutekeyagaintounmutetheaudiooutput.Thevolumecontinuesatthe
previously set level.
25
My Head unit keeps turning itself off then back on when connected to my iPod
This could be happening due to corrupt files and/or a corrupted version of the operating soft-
ware on your iPod. If you connect to your computer you may get a message on the iPod similar
to this: “The iPod ‘John’s iPod’ could not be updated because the firmware was corrupt.
Click this link to get a step-by-step guide to solve this issue: http://support.apple.com/kb/
ts1813.”
Why does my FUSION Head unit keep locking up when connected to my iPod/iPhone?
If you are experiencing software lock-ups or your unit freezes:
• Reset the Head unit by holding down the power button for 10 seconds or pressing the
reset button inside the face plate.
• Reset your Apple iPhone by powering down and then restarting the phone.
• Reset your iPod (see Apple website from model-specific information). This should resume
normal operation.
• Make sure you have the latest version of iTunes and the latest operating software in your
iPod/iPhone. It is important to update software when Apple releases new versions. If you
are connected via a dock, ensure you are using the correct sleeve and the connection to
the Head unit is secure.
Will my iPod/iPhone connect to my FUSION product if the battery is flat?
No. It will take a number of minutes for the Apple product to get a minimum level of charge
before it can connect and become operational. Please connect and wait for the unit to initialise.
My iPod/iPhone will not connect to the Head unit while in the dock.
If your Head unit displays “No iPod connected” while using iPod as input source:
• Check that you are using the correct sleeve combination. If you have the incorrect sleeve
combination this could prevent the iPod connector from mating correctly. It could also
damage the connector in the dock or your iPod/iPhone itself.
If you are uncertain which iPod model you have, go to http://www.apple.com/support/ to get
the correct model information for your iPod and sleeve.
If you are still unable to connect once you know for certain you have the correct iPod/iPhone–
sleeve combination:
• Ensure that you have the latest version of operating software installed in your iPod/iPhone
and the latest iTunes version. To do this, connect your iPod/iPhone to iTunes and it will
check and, if necessary, prompt you to download the latest version.
If you are still unable to connect once you have confirmed that you have the latest software or
you have updated your iPod/iPhone:
• Reset the iPod/iPhone (see the user manual for your Apple product) and also reset the
Head unit (see FUSION user manual).
If you are still unable to connect:
• Contact your FUSION dealer or contact FUSION via the tech email.
www.busse-yachtshop.de | info@busse-yachtshop.de
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fusion MS-RA50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fusion MS-RA50 in the language / languages: English as an attachment in your email.

The manual is 2,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Fusion MS-RA50

Fusion MS-RA50 User Manual - German - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info