Manual Fusion en am 8001 (page 12 of 40) (English)

167627

Zoom out

Zoom in

1/40

1212

INSTALLATION WARNING

1: Ensure the vehicle 12 volt lead is removed from the battery before any equipment is

connected

2: Investigate the vehicles gas tanks, brake lines and electrical wiring locations before you

begin installation

3: Attach the product securely to the vehicle to prevent damage in the event of an accident

4: Ensure all wiring is protected to avoid damage or pinching of the cables

INSTALLATION

Before any wiring and installation is performed, FUSION recommends you ﬁrst plan the complete

installation. Look at wiring routing, ampliﬁer location and ﬁtment. Please re-check the installation

at completion.

Appropriate mounting is very important for prolonged life expectancy of any ampliﬁer. Select

a location that allows enough space so sufﬁcient airﬂow is maintainable and a location that

provides protection from moisture. Keep in mind that an ampliﬁer should never be mounted

upside down. Upside down mounting will compromise heat dissipation through the heatsink and

could engage the thermal protection circuit.

Excessive heat will shorten your ampliﬁers life. To maximise heat dissipation, be sure to leave at

least 2.5 inches of clearance around the ampliﬁer. If space is of the essence and the ampliﬁer

must be mounted in an enclosed or restricted area, a small 3 inch fan should be used in

correspondence with a duct so the heat can ﬂow past the heatsink.

WARNING: Do not mount any ampliﬁer on a subwoofer enclosure as extended exposure to

vibration may cause malfunction of the ampliﬁer.

To avoid scratching your new FUSION Ampliﬁer, pre-drill the mounting holes with either a 3mm

or 9/64” diameter drill bit and use the screws supplied in the accessory kit.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fusion en am 8001 in the language / languages: English as an attachment in your email.

The manual is 3,52 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fusion en am 8001 Manual

Product: