63631
6
Zoom out
Zoom in
Previous page
1/13
Next page
1010
1111
SECURITY Setup
This is an Anti Theft Feature, if power is removed from product or battery is disconnected,
security code is required to re-activate.
Security ON
- Turn the joystick encoder to select the SECURITY icon, confirm your selection by pressing
the joystick
Local - Security - Clock Adjustment - Mode Scan - Menu Reset
-
Turn the joystick encoder to select ON, confirm your selection by pressing the joystick
- Input “0602” for the default setting code. If the input code is not “0602”, cancel old
security conditions.
- Input a new security number you would like to use.
1) Number change : Turn joystick encoder
2) Push joystick to confirm value.
- Input the number again for confirmation.
- If it is different from the first input number, menu shall be moved to the input status of
“NEW CODE”.
Security OFF
- Turn the joystick encoder to select the SECURITY icon, confirm your selection by pressing
the joystick
Local - Security - Clock Adjustment - Mode Scan - Menu Reset
-
Turn the joystick encoder to select OFF, confirm your selection by pressing the joystick
Turning Head Unit on when ‘Security On’ is activated
When the ‘Security On’ function is activated, you will be required to enter your security code
whenever you power the unit
1) Correct input of security code : Normal operation and POWER ON operation.
2) Incorrect input of security code : Operation is not available and code input is
continuously required.
CAUTION! : User must memorise their own security code. Setting is unavaliable if security
code unknown.
CLOCK ADJUSTMENT
- Turn the joystick encoder to select the CLOCK ADJUSTMENT icon, confirm your selection
by pressing the joystick.
Local - Security - Clock Adjustment - Mode Scan - Menu Reset
- Set the time by pushing the joystick right / left to select hr/min and turn the joystick
encoder to change the time. Press the
joystick to confirm the time.
MENU RESET
To reset every menu setting to the factory default, turn the joystick encoder to select the
MENU RESET icon, confirm your selection by pressing the joystick
Local - Security - Clock Adjustment - Mode Scan - Menu Reset
AUDIO SETUP
Turn the joystick encoder to select the AUDIO icon in the SETUP screen, confirm your
selection by pressing the joystick
General - Audio - Display - RDS
You can alter the follwing settings in the AUDIO menu;
-Treble/Mid/Bass
- Fader/Balance
- User EQ Settings
- High Pass Filter/Low Pass Filter
- Woofer
- SRS WOW
- Turn the joystick encoder to select the AUDIO setting you wish to alter, confrim your
selection by pressing the joystick
- Alter the chosen AUDIO setting by turning the joystick encoder. Confirm the alteration by
pressing the joystick.
- Press the MENU button to go back to the previous SETUP screen
DISPLAY SETUP
Turn the joystick encoder to select the DISPLAY icon in the SETUP screen, confirm your
selection by pressing the joystick
General - Audio - Display - RDS
You can alter the following settings in the DISPLAY menu;
- Dimmer
- Screen Saver
- Graphic EQ Style
- Button Illumination/LED colour
- Turn the joystick encoder to select the DISPLAY setting you wish to alter, confrim your
selection by pressing the joystick
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fusion CA-CD500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fusion CA-CD500 in the language / languages: English as an attachment in your email.

The manual is 3,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info