740411

Fusion Apollo MS-ERX400 Manual

6
Zoom out
Zoom in
Previous page
1/12
Next page
• Turn the dial to highlight an item on the screen.
• Press the dial to select the highlighted option.
Entering Text
1
In a field that allows you to enter text, select to erase the
existing characters.
2
If necessary, select or to use numerals or letters.
3
If necessary, select to change the case.
4
Turn the dial to choose a character, and press the dial to
select it.
5
Select to save the new text.
Control Screen
From the CONTROL screen, you can adjust the volume of any
zone on the network, create and edit stereo groups, and choose
a stereo to control.
Name of the stereo or zone on the network currently being
controlled by this device
Name and active source of a stereo on the network
Indicates that additional zones or stereos can be seen when you
scroll through the list
Select to add or remove stereos from a group (Fusion PartyBus
Networking, page 3)
Available speaker zones for network stereos
If you scroll down, additional zones are shown under the names of
other stereos on the network
Home zone indicator (Setting the Home Zone, page 2)
Naming the Device
You should enter a unique name for this device so you can
easily identify it when viewing devices on the Fusion PartyBus
network.
NOTE: You should provide unique names to all of the devices
and zones on the network to avoid confusion when grouping,
controlling, and setting up stereos and zones. You should also
turn off zones that are not in use.
For further customization, you can provide unique names for the
sources on each stereo and turn off unused sources.
1
Select > SETTINGS.
2
Select the device to rename.
3
Select DEVICE NAME, and enter a unique name for the
device.
Setting the Home Zone
The home zone is the speaker zone that you adjust by default
when you turn the dial.
1
Select > SETTINGS.
2
Select the name of this device.
3
Select ZONE > ASSIGN HOME ZONE.
4
Select a zone.
Temporarily Selecting a Stereo to Control
NOTE: You can also combine compatible stereos on the
network into groups for synchronized playback (Fusion PartyBus
Networking, page 3).
1
Press the dial to open the CONTROL screen.
2
Turn the dial, and select the stereo or zone you want to
control using this device.
The name of the stereo or zone appears on the status bar,
and you can change sources, settings, and adjust the volume
for the selected stereo or zone.
Adjusting the Volume
1
Turn the dial to adjust the volume.
2
If necessary, press the dial to view all zones, and select a
different zone.
TIP: You can select ALL to control all zones on the stereo or
all zones in the group at the same time (Fusion PartyBus
Networking, page 3).
Muting all Connected Stereos
You can quickly mute the audio from this stereo or from all
stereos connected to the Fusion PartyBus network (Fusion
PartyBus Networking, page 3).
1
From any source, press .
The mute symbol appears and audio from this stereo is
silenced.
NOTE: If the stereo is part of a group, the audio from all
grouped stereos is silenced.
2
Press and hold the dial to select MUTE SYSTEM.
Audio from all connected stereos is silenced.
3
Press and hold the dial to select UNMUTE SYSTEM.
Audio is restored to all connected stereos.
Adjusting the Subwoofer Level
You can adjust the subwoofer level for each zone.
1
Press the dial to open the CONTROL screen.
2
Turn the dial to select a zone.
3
Press and hold the dial.
The SUB LEVEL adjustment for the zone appears.
4
Turn the dial to adjust the subwoofer level.
Selecting a Source
1
Select .
2
Turn the dial to highlight a source.
NOTE: If the is device part of a group on the Fusion PartyBus
network, continue turning the dial to access the sources on
other devices in group (Fusion PartyBus Networking,
page 3).
A zone stereo, such as the Apollo SRX400, can create or join
a group to control and play sources from other stereos, but it
cannot share its sources with the group.
3
Press the dial to select the source.
Adjusting the Backlight Brightness
TIP: You can enable a power-saving option to turn off the
display on this remote control after a period of inactivity (Power
Options, page 4).
1
Select > SETTINGS.
2
Select the name of this remote control.
3
Select BRIGHTNESS.
4
Adjust the brightness level.
NOTE: You can adjust the backlight brightness on this
remote control only. If you want to adjust the brightness on
other remote controls or stereos on the network, you must
adjust the setting from each remote control or stereo directly.
2 Getting Started
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fusion Apollo MS-ERX400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fusion Apollo MS-ERX400 in the language / languages: English as an attachment in your email.

The manual is 1,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Fusion Apollo MS-ERX400

Fusion Apollo MS-ERX400 User Manual - German - 14 pages

Fusion Apollo MS-ERX400 User Manual - Dutch - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info