522144
35
Zoom out
Zoom in
Previous page
1/52
Next page
3. SETTING UP THE EQUIPMENT
3-13
3.5 Wireless LAN Setting
The TZT9/14 can be configured to create a wireless network (“Ad Hoc”) or to connect
to an existing wireless network. Connecting to an existing wireless network is very
useful if you already have an Access Point setup on your boat, especially if you have
Internet available. Simply connect the TZT9/14 and your smartphone or tablet to the
existing wireless network. Since the TZT9/14 and smartphone/tablet device will be on
the same network, you will be able to share data (using the “NavNet Viewer” App) as
well as access the internet (for Weather downloads). Please note that in this configu-
ration, the “NavNet Remote” App performance is inferior due to a larger amount of
data being exchanged between the iPad and the MFD (through the access point). The
“NavNet Viewer” App performance will not be affected in this mode, as the bandwidth
usage is very low. If you do not have an existing wireless access point on your boat or
if you want to achieve the best performance with the “NavNet Remote” App, we rec-
ommended you establish a “point-to-point” connection. This can be accomplished by
configuring the MFD to create a WiFi network (Ad Hoc network). In this mode, the
MFD becomes an Access Point (you can setup the network name and password) to
which the phone/tablet can connect directly.
Create a wireless LAN network to use the application on your smartphone or tablet
with the wireless LAN signal. Select [Wireless LAN Settings] on the [Menu General]
sub menus.
Wireless LAN Settings sub menus
How to create a new Wireless LAN network
1. Select [ON] at [Wireless].
2. Select [Create local network] at [Wireless Mode].
3. Set items as shown below.
Item Description Options
[SSID] Enter SSID (Service Set Identifier) to
use.
Maximum 32 characters
[Authentication] Select the authentication. [Open], [WEP], [WPA2-PSK]
[Password] Enter the password for connection to the
LAN.
Numbers of the character depends
on the selection at [Authentica-
tion].
[Network Status] Select [ON] to connect with your tablet/
smartphone over wireless LAN network.
[ON], [OFF]
NAVNETTZT
Wireless LAN Settings
Wireless
Wireless Mode
Create local network
Create local network
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno TZT14 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno TZT14 in the language / languages: English as an attachment in your email.

The manual is 45,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Furuno TZT14

Furuno TZT14 User Manual - English - 16 pages

Furuno TZT14 User Manual - English - 250 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info