522144
32
Zoom out
Zoom in
Previous page
1/52
Next page
3. SETTING UP THE EQUIPMENT
3-10
How to align the antenna heading
You have mounted the antenna unit facing straight ahead in the direction of the
bow. Therefore, a small but conspicuous target dead ahead visually should ap-
pear on the heading line (zero degrees).
In practice, you will probably observe some small bearing error on the display be-
cause of the difficulty in achieving accurate initial positioning of the antenna unit.
The following adjustment will compensate for the error.
1) Set your radar with 0.125 and 0.25 nm range and the head up mode.
You can select a range by a pinch action. The range and range ring interval
appear at the bottom left of the screen.
2) Turn the vessel’s bow toward a target.
3) Press the Home key, then select [Menu] icon, [Radar], and [Antenna Heading
Align] in that order to show the numeric software keyboard.
4) Key in the offset value so that the target becomes at the very top of the screen
(setting range: +/- 0° to 180°, +: clockwise direction, -: counterclockwise direc-
tion), then tap [Save].
5) Confirm that the target echo is displayed at correct bearing on the screen.
Range
Range ring interval
Zoom in
Zoom out
Pinch action
Range indications
1
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno TZT14 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno TZT14 in the language / languages: English as an attachment in your email.

The manual is 45,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Furuno TZT14

Furuno TZT14 User Manual - English - 16 pages

Furuno TZT14 User Manual - English - 250 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info