522156
21
Zoom out
Zoom in
Previous page
1/28
Next page
4. MAINTENANCE, TROUBLESHOOTING
13
4.3 Troubleshooting
Heading is not output
Check installation site:
Check for interfering objects near the antenna.
Check the installation site and mounting base for vibration.
Check for antenna of radar, radio equipment, etc. near the installation site.
Check connections:
1. NMEA-2000 bus connection
Check that the connector on the SC-30 is tightly connected.
Check that no stress is applied to the cable and that a loop has been made with the cable
to prevent cable stress.
Check that terminators (120 ohm) are attached at each end of the NMEA 2000 network.
Check that the input voltage to the SC-30 is 12-24 VDC.
Check that all devices connected to the NMEA 2000 bus are within the current capacity of
the bus.
Check that the cable (MJ-A10SPF0016-060C (6m)) is used. (If power is fed through a trunk
line, the feeder cable shall be no longer than 6 m).
If power to the SC-30 is fed directly from the ship's mains, check breaker switch on mains
switchboard and fuse in power cable.
2. IF-NMEASC interface unit connection:
See the IF-NMEASC's operator's manual.
Heading output stops often. Position and GPS-related items are output but heading is
not.
Check for interfering object near the SC-30.
Check installation site for vibration.
Check if antenna of radar, radio equipment, etc. is near the installation site.
Equipment in NMEA 2000 network malfunctions when SC-30 is connected
Check that terminators (120 ohm) are attached at each end of the NMEA 2000 network.
Check that the input voltage to the SC-30 is 12-24 VDC.
Check that all devices connected to the NMEA 2000 bus are within the current capacity of the
bus.
Check that the cable (MJ-A10SPF0016-060C (6m)) is used. (If power is fed through a trunk line,
the feeder cable shall be no longer than 6 m).
Heading is output normally in fine wather but is not output in bad weather
Check the installation site for vibration.
Busse-Yachtshop.de info@busse-yachtshop.de
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno SC-30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno SC-30 in the language / languages: English as an attachment in your email.

The manual is 2,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info