522156
16
Zoom out
Zoom in
Previous page
1/28
Next page
1. MOUNTING
8
3. Slip the rubber bushing (supplied) onto the sensor cable at the location shown below. Attach
the cable to the connector. Make a loop in the cable to prevent cable fatigue.
4. Tighten the cable clamp and close the cable cover.
5. Orient the sensor so the bow mark (on the underside of the narrower end) on its underside is
facing the bow. Fasten the sensor to the platform with hex. bolts, spring washers and flat
washers. Use M10x25 bolts if the thickness of the platform is less than 5 mm. For greater
thickness use M10x30 bolts. The torque for the hex. bolts should be 20±2Nm.
Note: For the sensor cable passed through the mounting pipe, fill the gap between the pipe
and the cable with silicone sealant, for waterproofing.
6. Coat exposed parts of bolts and wash-
ers with silicone sealant.
7. If you have the optional "bird-repellent
fixtures", attach them to the sensor sim-
ilar to as shown in the figure below. (You
may change the pattern as desired.)
8. Fix the sensor cable to the pipe at suit-
able intervals with the cable ties (sup-
plied).
Cable clamp
Loop in cable
Rubber bushing
Projection
(This end of bushing
next to connector.)
Rubber bushing
Sensor
Coat with
silicone sealant.
Platform
Busse-Yachtshop.de info@busse-yachtshop.de
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno SC-30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno SC-30 in the language / languages: English as an attachment in your email.

The manual is 2,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info