675835

Furuno RO4700 MarineRadio (Engels) Manual

19
Zoom out
Zoom in
Previous page
1/22
Next page
Page 37 Page 38
6.8 DSC SETUP
The submenu is used to set behavior of the DSC/ATIS function.
The following 5 items are available for selection.
USER MMSI
GROUP MMSI
INDIV REPLY
DSC ENABLED
POS REPLY
6.8.1 ENTER YOUR USER MMSI
This is a once-only operation.
You must enter your user MMSI first then you can access the DSC
functions.
1 Select DSC SETUP then USER MMSI and press the CH knob. If an
existing MMSI is stored, the values appear.
2 If the MMSI is blank, a dashes line appear. Enter user MMSI along
the dashed line. Press the CH knob to confirm each correct entry to
move to the next digit.
If your make an error, Rotate the CH knob < appears, then press
the CH knob to backup and correct the entry.
3 Hold the CH knob to store your user MMSI.
4 Enter your user MMSI again as a password check, hold the CH knob to
permanently store the your user MMSI and return to the menu.
5 You can view your stored user MMSI at anytime by selecting user MMSI
in the main menu.
6 If there is no USER MMSI stored and the radio’s DSC function is
attempted, the radio says “DSC IS NOT OPERATIONAL.” & “PLEASE
ENTER MMSI” as below.
DSC WARNING MESSAGE
6.8.2 MAINTAIN GROUPS
You can program up to three group MMSI numbers and associated Group
names, group MMSI numbers always begin with a zero (0). You only enter the
last 8digits of the group ID number, the intial”0” is automatically entered.
6.8.2.1 ENTER YOUR GROUPS
1 Select GROUP MMSI and press the CH knob. If an existing names &
MMSI data are stored, the values appear.
If is blank, the dash appear on LCD
2 The entry procedures are same as that of the BUDDY LIST.
6.8.2.2 EDIT USER GROUPS
1 Select DSC SETUP then GROUP MMSI and press the CH knob. The
existing names & MMSI data are displayed on screen. Select the Buddy
name or, only the MMSI that you wanted
2 Press the CH knob to edit. The entry procedures are same as that of the
BUDDY LIST
3 when the edition is finish press the CH knob to store the changes and
return to the GROUP MMSI screen.
6.8.2.3 DELETE A GROUP
1 Select GROUP MMSI and press the CH knob. The existing group
names are displayed on screen
2 Select that you wanted delete and press the CH knob will display
EDIT or DELETE item
3 Select DELETE and press the CH knob will display DELETE
GROUP menu arrow point the YES, then press the CH knob to
DSC IS NOT
OPERATIONAL
PLEASE ENTER
MMSI
USER GROUP
>EILEEN
CHANG
FRIENDS
EDIT NAME:
>EILEEN
MMSI:
ID053421608
EILEEN
>EDIT
DELETE
DSC SETUP
USER MMSI
>GROUP MMSI
INDIV REPLY
USER GROUP
> - - - - - - - -
- - - - - - - - -
- - - - - - - -
GROUP NAME
> - - - - - - - - - -
GROUP MMSI
IDO - - - - - - - - -
INPIT MMSI
NUMBER
>- - - - - - - -
HOLD ENTER
USER MMSI
INPUT AGAIN
>- - - - - - - -
HOLD ENTER
USER MMSI
ID 500000001
>SAVE
C
ANCEL
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno RO4700 MarineRadio (Engels) at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno RO4700 MarineRadio (Engels) in the language / languages: English as an attachment in your email.

The manual is 1,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info