Manual Furuno RO4700 MarineRadio (Engels) (page 10 of 22) (English)

675835

Zoom out

Zoom in

1/22

Page 19 Page 20

channel and the icon M will be turned on for indication that

channel be saved in MEM lists displayed on the LCD display

4.3.2 SAVE favorite the Channels

Your can store in the hope of channels as favorite channel.

Program the FAV channel and store Process as follow:

1. At normal mode, tune to the desired channel and then press and hold

the BAND/SAVE key to save it as Favorite channel. The icon

will

be turned on for indication that channel be saved in FAV list.

2. Then tune to next desired channel and repeat the keystroke

sequences till all desired channels be programmed / saved.

4.3.3 MEM Channels delete

1 Delete the channel from the MEM list at Normal mode. Select

the target channel with icon ON. Press and hold the

BAND/SAVE key till the icon turn OFF. The target channel will

then be deleted out from the MEM list. Repeat the keystroke

operation for those unwanted channels.

2 If no channel has been programmed, an error beep occurs with

indicate error message.

4.4 Transmit time-out timer (TOT)

When the PTT button on the microphone is held down,

transmit time is limited to 5 minutes. This will avoid

unintentional transmissions. About 10 second before

automatic transmitter shutdown, a warning beep will be heard

from the speaker(s). The transceiver will automatically go to

receive mode. Before transmitting again, the PTT button must

be released and then pressed again.

4.5 Scan:

Scanning is an efficient way to locate signals quickly over a

wide frequency range.

The transceiver Scan mode has 2 types available: normal

scan, memory channels scan. If no memory channels the way

is normal all scan (1.2.3.4…), if there are memory channels

only scan memory channels, every one’s have a normal scan

and the priority scan

1 During normal scan Press and hold SCAN Key over 3sec, the

Priority scan mode (1,16,2,16,3,16…) will be selected. P-scan

icon will be appear on LCD Press and hold SCAN key over

3sec to turn it back to normal scan, the scan mode icon will be

display.

2 During the SCAN modes: Press Up/Down key (CH knob

clockwise/anti-clockwise) will change the scan direction.

3 Press SCAN key again will terminate the scan operation and

stop at the last used channel.

Press CANCEL key will also terminate the scan function and

state at the last used channel

It also can be to cancel by 16.PTT.

4.6 Watch

4.6.1 Dual watch

Press Watch key to activate the DUAL WATCH mode. Monitor

the current channel and Ch 16 in cycle. Icon “DU” will appear on

the LCD.

4.6.2 Tri-watch

Press and hold Watch key to activate the TRI WATCH mode.

Monitor the current channel, CH 16 and CH 9 in cycle. Icon “TRI”

will be turn ON

To quit the mode, press WATCH, 16, DSC/MENU, CANCEL key,

Press PTT key to TX mode of current channel

4.7 POSITION INDICATION

Your transceiver can display the position of the vessel’s (longitude and

latitude) as well as time and data information, if connected to a GPS

receiver; if no GPS equipment to be connected,an alert tone of 1-minute

duration witch can cancelled By any button is sounded at 4 hour

intervals to encourage manual input of positional data . Once no manual

input is made for 23.5 hours, GPS disappears from the screen, the

position data transmitted goes to 9’s and all the time data goes to 8’s.

5 DIGITAL SELECTIVE CALLING

5.1 GENERAL

DSC(Digital Selective Calling) is a semi-automated method of establishing a

radio call, it has been designated by the International Maritime Organization (IMO)

as an international standard for establishing VHF, MF and HF radio calls. It had

DISTRESS

23’20.1234 N

100’15.1002 E

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Furuno RO4700 MarineRadio (Engels) in the language / languages: English as an attachment in your email.

The manual is 1,79 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Furuno RO4700 MarineRadio (Engels) Manual

Product: