522212
67
Zoom out
Zoom in
Previous page
1/94
Next page
4. INSTALLATION
4-15
4.6 Adjustments
After wiring all units, initialize each remote display as follows:
1. While you hold down the DISP key, press the PWR key to turn on the power.
Service menu
2. Press S or T key to select a menu item and press the ENT key.
3. Press S or T key to select an option and press the ENT key.
4. Repeat steps 2 and 3 to set the menu items desired.
5. Press the PWR key to close the service menu and turn off the power.
Service menu items
Menu Description Default
UNIT Name
For serviceman.Serial No
PWB No
Remote Dimmer [Main]: Set the unit which is connected to
the dimmer controller in the daisy chain
connection as the main unit.
[Sub]: Set the unit which is not connected
to the dimmer controller in the daisy chain
connection as a sub unit.
[Main]
Depth Select Select the input sentence for depth from [Au-
to], [Keel (DBK)] (Depth below keel), [Trans-
ducer (DBT)] (Depth below transducer) or
[Surface (DBS)] (Depth below surface). In the
[Auto] mode, the highest priority data is [Keel
(DBK)] and the lowest is [Surface (DBS)].
[Auto]
Depth Position Select the mounting location of the transduc-
er from [Single], [FWD] (forward) or [AFT] (af-
ter).
[Single]
XXXX: Serial number
XX: Program version number
XXXX
XX
67


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno RD50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno RD50 in the language / languages: English as an attachment in your email.

The manual is 9,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info