522210
23
Zoom out
Zoom in
Previous page
1/52
Next page
2. MAINTENANCE, TROUBLESHOOTING
15
3. Press the MODE key.
4. Press each key except the PWR key. You can test up to 10 keys. The key name for the key
pressed and the number of keys remaining to test are displayed. When the count is 0, the start
screen for the key test appears. When testing more than 10 keys, repeat steps 3 and 4.
5. To stop the test, press the PWR key.
Note: For the remote controller and dimmer controller, "-R" is displayed after the key name except
the DAY/NT key.
2.5 Simulation Mode
The simulation mode, which shows internally generated navigation data, is provided to acquaint
you with the features of the RD-20. "SIM" appears and flashes at the upper-right corner of the
screen when the simulation mode is turned on.
1. While you hold down the UNIT key, press the PWR key to turn on the power.
2. Press T key twice. The screen for simulation appears.
Note: You can not use the T key of the RD-502 at this screen.
3. Press the MODE key to start the simulation mode.
4. To stop the simulation mode, press the PWR key to turn off the power.
Start screen for
automatic test
SELECT
AUTO
10
KEYTEST
While holding down the UNIT key,
press the PWR key to turn on the power.
9
SELECT
KEYTEST
key
Start screen for
key test
MODE key
KEYTEST
DISP
Any key (for example,
DISP key)
Any key
0
KEY TEST
UNIT
(for example,
UNIT key)
10.8
SOG
SIM
AFT
kn
The indication
“SIM” appears.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno RD20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno RD20 in the language / languages: English as an attachment in your email.

The manual is 4,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info