522216
26
Zoom out
Zoom in
Previous page
1/36
Next page
3. MAINTENANCE AND TROUBLESHOOTING
18
3.3 Troubleshooting
If a problem occurs, first do the following inspections. If the problem persists, contact the dealer
or a qualified service technician.
3.4 How to restore default settings
You can revert the unit to factory settings by doing the following:
1. Disconnect the cable from the unit.
2. Press and hold the [-] key, and reconnect the cable. Continue pressing the [-] key until step 3
is completed. Power is applied to the unit, all lamps flash. When initialization is completed, all
lamps light.
3. When all lamps light, stop pressing the [-] key.
4. To return to normal state, reconnect the unit cable.
Problem Action
Lamps do not light. Check to ensure the connector is tightened.
Check to ensure the cable is not corroded.
Check to ensure the cable is not damaged.
Check that the routing of the power supply is functioning prop-
erly.
Red lamp is on. Turn the power on and off several times. If the red lamp remains
lit, contact your dealer.
No magnetic bearing data. Turn the power on and off several times. If the problem persists,
contact your dealer.
Check the terminal switch.
: Flashing (red/green)
: Flashing (green)
CALIB STATUS CHECK
After power
is applied
CALIB STATUS CHECK
Initialization
completed
: ON (red/green)
: ON (green)
Each lamp flashes
several times
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno PG-700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno PG-700 in the language / languages: English as an attachment in your email.

The manual is 3,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info