522216
19
Zoom out
Zoom in
Previous page
1/36
Next page
1. HOW TO INSTALL THE EQUIPMENT
11
1.4 Heading Adjustment
The amount of adjustment required for the heading depends on the outcome of the previous sec-
tion [1.3 Compensation of Deviation]. Do the following to correct the discrepancy.
1. Press the [+] or [-] key. All lamps flash green and the unit enters heading adjustment mode.
Note: Perform step 2 within five seconds. Heading adjustment mode stays active for 5 sec-
onds after the key is pressed. If you do nothing, the unit returns to normal mode automatically.
2. Use the [+] or [-] key to adjust the difference between the sensor output heading and the actual
heading.
Heading can be adjusted at intervals of 0.1° or 1.0°. (see table below).
CAUTION
Before doing the heading adjust-
ment, turn off the autopilot.
The rudder may jerk violently if the
autopilot is powered, creating a
dangerous condition.
Key Set interval Lamp Status
Short press [-] key with-
in 5 seconds
-0.1°
(decreases 0.1°
with every press)
Each time you press the [-] key, the STATUS lamp
will light on and off.
Long press [-] key with-
in 5 seconds
-1.0°
(decreases in 1.0°
increments while
key is pressed)
: Flashing (green)
CALIB STATUS CHECK
CALIB STATUS CHECK
1
st time
CALIB STATUS CHECK
2
nd time
CALIB STATUS CHECK
3rd time
Repeats
CALIB STATUS CHECK
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno PG-700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno PG-700 in the language / languages: English as an attachment in your email.

The manual is 3,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info