522139
23
Zoom out
Zoom in
Previous page
1/60
Next page
2-5
2.7 Setting Functions (FUNCTIONS menu)
See menu description below for detailed information.
1. Press the [MENU] key to open the main menu.
2. Press
!
or
"
to select FUNCTIONS.
3. Press the [ENT] key to display the FUNCTIONS menu.
Figure 2-14 FUNCTIONS menu
4. Press
!
or
"
to select menu item and press the [ENT] key.
5. Press
!
or
"
to select option desired.
6. Press the [ENT] key to register your selection.
7. Press the [MENU] key twice to close the menu.
2.7.1 FUNCTIONS menu description
RCV NOTIFY:
The raw NAVTEX signal can be monitored through the monitor speaker by turning
RCV NOTIFY on. The default setting is OFF.
RCV ALARM:
The audible alarm may be generated when message type A, B, D or L is received.
The default setting is ON.
KEY BEEP:
The equipment can emit a beep tone when a control is operated. The default setting
is ON.
ERROR RATE:
When character error occurs due to noise interference during signal propagation,
erroneous character is displayed as “
”.
Error Rate means character error rate and is calculated as followed:
Error Rate = number of erroneous characters
÷
total number of characters received
×
100 (%)
(Total number of characters includes space, line feed, carriage returns, etc.)
When the character error rate is within the percentage you set (0-39%), the NX-300 displays the
message and stores it. When it exceeds the percentage you set, the NX-300 neither displays nor
stores the message. You may set the threshold level of character error rate as desired and the
default setting is 33%.
www.Busse-Yachtshop.de email: info@busse-yachtshop.de
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno NX-300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno NX-300 in the language / languages: English as an attachment in your email.

The manual is 1,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info