522136
14
Zoom out
Zoom in
Previous page
1/47
Next page
7
Table 1-1 Default ranges
Basic Range
Unit
1 2 3 4 5 6 7 8
meters 5 10 20 40 80 150 200 300
feet 15 30 60 120 200 400 600 1000
fathoms 3 5 10 20 40 80 120 200
P/B 3 5 10 30 50 100 150 200
1. Press the [+] or [-] key of the [RANGE]
key and the display should now look
something like the one below.
2. Press the [+] or [-] key of the [RANGE]
key again to choose a basic range.
1000ft
600ft
400ft
200ft
120ft
60ft
30ft
15ft
Basic ranges (default)
Shifting the range
The basic range may be shifted up or down
in the manual mode as follows:
1. Press the [MENU/ESC] key to open the
menu.
2. Choose SHIFT from page 1 of the
menu.
3. Press to open the shift options
window.
0ft
Shift window
4. Use or to choose amount of shift
desired.
5. Press the [MENU/ESC] key to close the
menu.
Note: The picture may not be displayed if
the amount of shift is greater than actual
depth.
Adjusting the gain
The [GAIN] key adjusts the sensitivity of the
receiver. Generally, use a higher gain
setting for greater depths and a lower
setting for shallower waters.
Gain too high Gain proper Gain too low
Examples of proper and improper gain
1. Press the [GAIN] key and the display
shown below appears.
Min Max
50k 3
200k 2
GAIN
Gain adjustment window
2. When using the dual frequency display,
press or to choose frequency.
3. Press the [GAIN] key to set. (You may
also use or .) Adjust so that a slight
amount of noise remains on the screen.
4. Press the [MENU/ESC] key to close the
gain adjustment window.
1.8 Choosing Picture
Advance Speed
The picture advance speed determines how
quickly the vertical scan lines run across
the screen. When choosing a picture
advance speed, keep in mind that a fast
advance speed will expand the size of the
fish school horizontally on the screen and a
slow advance speed will contract it. Note
that the picture is not refreshed when
picture advancement is stopped. Therefore,
use caution when steering the vessel under
this condition.
www.Busse-Yachtshop.de email: info@busse-yachtshop.de
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno LS-6100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno LS-6100 in the language / languages: English as an attachment in your email.

The manual is 1,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info