522135
43
Zoom out
Zoom in
Previous page
1/48
Next page
37
GPS WAAS: Chooses how to use the
WAAS signal when connecting with a
WAAS receiver, for example GP-320B.
Note: WAAS is currently in the
developmental phase. During the
developmental phase the reliability and
availability of the WAAS signal cannot
be guaranteed. Therefore, any position
data should be verified against other
sources to confirm reliability.
1. Display the Installation menu.
2. Choose GPS WAAS and then press
to open the GPS WAAS options
window.
Off
WAAS options window
3. Press or to choose “WAAS-02”
(test signal). When the system
becomes operational (in 2003), set
to “00” (regular WAAS signal).
4. Turn off the power.
BOTTOM LEVEL: If the depth
indication is unstable in automatic
operation, or the bottom echo cannot be
displayed in the darkest gray tone by
adjusting the gain controls in manual
operation, you may adjust the bottom
echo level detection circuit, for both 50
kHz and 200 kHz, to stabilize the
indication. Generally, lower the bottom
level for inner hull installation where the
receive level is too low. If the bottom
level is too low it may be difficult to
discriminate fish from the bottom,
resulting in unstable depth indication.
And if the bottom level is too high the
depth indication may not appear.
1. At the installation menu, press to
choose SET BOTTOM LEVEL and
then press . Several seconds later
the following display appears.
Bottom level
+0 (200k: -100 - +100 )
+0 ( 50k: -100 - +100 )
Bottom level display
2. While observing the picture, use
or to set 200 kHz; or to set
50 kHz. Set up for optimum picture.
3. To restore normal operation, turn off
the power and then it on again.
Note: The mode must be other than
“NAV DATA” to show the bottom level
display.
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno LS-4100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno LS-4100 in the language / languages: English as an attachment in your email.

The manual is 1,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info