522135
11
Zoom out
Zoom in
Previous page
1/48
Next page
5
1.5 Menu Operating
Procedure
The LS-4100 has three menus: Main,
System and Installation. Below is the
basic menu operating procedure.
1. Press the [MENU/ESC] key to open
the main menu. Page 1 or Page 2 of
the main menu appears depending
on the page last used.
[MENU]: Exit
(1/2)
Note: SHIFT and CLUTTER are
not available in the auto mode.
AUTO MODE Off
SHIFT : 0ft
PIC. ADVANCE : 1/1
NOISE LIMIT : Off
CLUTTER : Off
SIGNAL LEVEL : Off
A-SCOPE : Off
HUE : Day
WHITE LINE : Off
DEEP GAIN : Low
Page
no.
Main menu, page 1
2. Use or to select an item. To
view page 2 of the main menu, press
until showing the display below.
[MENU]: Exit
(2/2)
GOTO WPT Off
WAYPOINT LIST...
TRIP RESET?
GAIN ADJ 200 : +0
GAIN ADJ 50 : +0
DRAFT : 0.0ft
ALARM MENU...
SYSTEM MENU...
Main menu, page 2
3. Press to show selected item’s
options window. The example shown
at the top of the right column is the
options window for AUTO MODE.
Off
Cruising
Fishing
Auto mode options window
4. Use or to choose option or set
numeric value.
5. Press the [MENU/ESC] key to close
the menu, or press to continue
menu operation.
1.6 Automatic Operation
How automatic operation works
The automatic function automatically
chooses the proper gain, range scale
and clutter. It works as follows:
The range changes automatically to
display the bottom echo on the
screen.
The gain is automatically adjusted to
display the bottom echo in the darkest
tone.
Clutter (on the menu), which
suppresses low-level noise, is
automatically adjusted.
Choosing automatic operation
The automatic mode provides two
choices of modes: cruising and fishing.
1. Press the [MENU/ESC] key to open
the main menu.
2. Press to choose AUTO MODE
from page 1 of the menu.
3. Press to open the mode options
window.
4. Choose Cruising or Fishing as
appropriate.
“Cruising” is for tracking the bottom;
“Fishing” is for searching fish schools.
Since “Cruising” uses a higher clutter
rejection setting than fishing, it is not
recommended for fish detection -
weak fish echoes may not be
displayed. “Fishing” clearly displays
weaker echoes.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno LS-4100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno LS-4100 in the language / languages: English as an attachment in your email.

The manual is 1,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info