30312
23
Zoom out
Zoom in
Previous page
1/38
Next page
2. OPERATION
17
Sounding an automatic warning signal
1. Press the [Hail Select] key until the indicator lights for the desired horn speaker(s). If no
selection is made, “BOTH” will be automatically selected when a warning signal is
initiated.
2. Press the [Upper Signal Select key] to select UNWY, SAIL or TOW or press the [Lower
Signal Select] key to select STOP, ANCH or AGND until the indicator flashes for the
desired signal.
3. Press the [FUNC] key to activate the automatic warning signal. The indicator stops
flashing and lights and then the signal is sounded from the selected horn speaker(s).
4. To temporarily interrupt automatic signals with voice transmissions, press the [FUNC]
key. The indicator for the chosen signal flashes to indicate the signal is still selected, but
not active.
5. Press the PTT switch on the microphone and speak into the microphone. Your voice
sounds from the chosen horn speaker(s).
6. Release the PTT switch and press the [FUNC] key again to return to automatic warning
signals.
7. To stop transmitting automatic warning signals, press the [FUNC] key followed by the
[Hail Select] key to return to the standby mode.
Calling intercom stations while sounding warning signals
Calling all intercom stations
1. While pressing and holding down the [Hail Select] key, press the PTT switch. All
intercom indicators flash.
2. Press the PTT switch on the microphone and speak into the microphone.
3. After speaking, release the PTT switch and then the [Hail Select] key to return to the
chosen warning signal.
Calling a specific intercom station
1. Press the [Intercom Select] key until the indicator lights on the desired intercom station.
A short tone sounds from the selected intercom one second after choosing a station.
2. Press the PTT switch on the microphone and speak into the microphone.
3. Release the PTT switch to listen to the reply from the selected intercom station. If
necessary, adjust the listening volume with the [LISTEN VOL] control.
4. After you have finished your conversation, press the [Hail Select] key to return to the
standby mode. Signal activity on the selected horn speaker will be restored.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno LH3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno LH3000 in the language / languages: English as an attachment in your email.

The manual is 0,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Furuno LH3000

Furuno LH3000 User Manual - Spanish - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info