522213
19
Zoom out
Zoom in
Previous page
1/28
Next page
5. MAINTENANCE, TROUBLESHOOTING
11
5.2 Replacing the Fuse
The 2A fuse inside the unit protects it from overcurrent and equipment fault. If the power cannot
be turned on, have a qualified technician check the fuse. If the fuse has blown, find out the cause
before replacing it. If it blows again, contact your dealer for advice.
5.3 Troubleshooting
This section provides simple troubleshooting procedures which the user can follow to restore nor-
mal operation. If normal operation cannot be restored, do not attempt to check inside the equip-
ment. There are no user-serviceable parts inside.
Simple troubleshooting procedures
Item Type Code No,
Fuse FGMB 125V 2A PBF 000-157-479-10
Symptom Possible trouble Remedy
Power cannot be
turned on
Power at switchboard is turned
off.
Disconnected or damaged
power cable.
• Blown fuse.
Check if power is on at switchboard.
Check if power cable is disconnected
or damaged.
Have a qualified technician check the
fuse.
Data is not received
from SC-30
Signal cable between the SC-
30 and this equipment is dam-
aged or disconnected.
SC-30 is no received satellite
signal.
Check if sensor cable is disconnect-
ed or damaged.
See the SC-30's operator's manual.
Data is not received
at external equip-
ment
Disconnected or damaged in-
terconnection cable.
Output settings may be incor-
rect.
Check if cable is disconnected or
damaged.
Have a qualified technician check the
settings.
Heading, pitch or roll
data is not correct
Offsets entered in this equip-
ment may be incorrect.
Have a qualified technician check the
settings.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno IF-NMEASC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno IF-NMEASC in the language / languages: English as an attachment in your email.

The manual is 1,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info