522213
16
Zoom out
Zoom in
Previous page
1/28
Next page
3. ADJUSTMENTS
8
3.3 Heading, Pitch and Roll Offsets
Turn on the IF unit and wait approx. three minutes for the satellite compass to settle. Then, check
that heading, pitch and roll data are reasonable. If not, open the unit and enter appropriate off-
set(s).
1. Open the cover, referring to step 1 in the previous section for the procedure.
2. Open the inner cover.
On the circuit board, find the heading display, LED set, and operating buttons. The Heading
LED is lit
3. Push the [Menu/Cancel] button to light the applicable Offset LED (Heading, Pitch, or Roll) and
push the [Enter] button. The selected LED starts flashing and the display shows current offset
for item selected.
4. Use the [+] or [-] button to set offset. (You can push and hold down those buttons to speed up
the rate of incrementation.)
Range of offset
Heading: ±6°
Pitch, Roll: ±10°
5. Push the [Enter] button to finish. The display shows current heading, pitch or roll indication
with offset applied. The selected Offset LED stops flashing.
6. Close the inner and outer covers.
OUTPUT PROCESSING
0 3
Heading Pitch
Sentence
Roll
Bps
Output
Interval
BpsSentence
Offset
Output
Interval
Operating
buttons
Use the [Menu/Cancel]
button to show the
heading indication.
Push the [Enter] button
to show the heading
offset value.
- +
Enter
Menu/
Cancel
Port 2
Port 3
When offset
is minus
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno IF-NMEASC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno IF-NMEASC in the language / languages: English as an attachment in your email.

The manual is 1,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info