13377
71
Zoom out
Zoom in
Previous page
1/85
Next page
12-3
12.4 Error Messages
This equipment displays the following error
messages on the alarm menu to alert you to
possible trouble.
Table 12-4 Error messages
egasseMrorrEydemer,gninaeM
XIFSPGON
.langisSPGoN
.elbacannetnakcehC
LAITNEREFFIDON
.NOITCERROCSPG
)ylnoD0581-PG(
.langisSPGDoN
.annetnakcehC
FOEGATLOV
SIYRETTABLANRETNI
.WOL
lanretnifoegatloV
.wolsiyrettab
tnemecalpertseuqeR
.yrettabfo
12.5 Diagnostic Tests
Memory, I/O port test
This test conducts a general check of the dis-
play unit and the antenna unit. The unit dis-
plays the results for each device or
component checked as OK or NG (No Good).
1. Press the [MENU] key to open the main
menu.
2. Press the soft key CONFIGURATION to
show the configuration menu.
CONFIG
DGPS 3D
SETUP NMEA PORT 1
UPLOAD/DOWNLOAD DATA
SETUP NMEA/DGPS PORT 2
SYSTEM MENU
RETURN
Figure 12-1 Configuration menu
3. Press the soft key SYSTEM MENU to
open the system menu.
SYSTEM
MENU
DGPS 3D
SELF TEST
MEMORY/TRIP CLEAR
DEMONSTRATION MODE
RETURN
Figure 12-2 System menu
4. Press the soft key SELF TEST to open
the test menu.
TEST
DGPS 3D
MEMORYI/O TEST
TEST PATTERN
KEYBOARD TEST
RETURN
REMOTE CONTROLLER TEST
Figure 12-3 Test menu
5. Press the soft key MEMORY•I/O TEST
to start the test. The test results appears
as below.
PROGRAM: OK
No.14518260**
RETURN
TEST
SRAM: OK
DRAM: OK
PORT1: OK
PORT2: OK
INTERNAL
BATTERY: OK
GPS
RECEIVER: OK
No.48502170**
BEACON
RECEIVER: OK
No.08501820**
No.
: Special connections are required to check these ports.
Otherwise, "--" appears.
**: Pro
g
ram Version No.
Figure 12-4 Memory, I/O test results
6. The test runs continuously. To return to
the self test menu, press the soft key
RETURN.
Note: BEACON RECEIVER results only ap-
pear on GP-1850D.
71


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno GP1850D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno GP1850D in the language / languages: English as an attachment in your email.

The manual is 1,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info