13377
56
Zoom out
Zoom in
Previous page
1/85
Next page
10-6
DGPS SETUP OPTIONS menu
This menu sets parameters for the DGPS
beacon receiver. (GP-1850D, or GP-1850
equipped with DGPS beacon receiver.) To
display it, press the [MENU] key followed by
the soft keys GPS/DPGS/TD OPTIONS and
DGPS SETUP OPTIONS.
DGPS
OPTION
DGPS 3D
RETURN
DGPS MODE ON
BEACON FREQUENCY AUTO
BEACON BAUD RATE AUTO
DGPS ALARM OFF
s
EDIT
Figure 10-9 DGPS setup options menu
DGPS MODE
Select ON to use the DGPS mode. The de-
fault setting is ON. A DGPS beacon receiver
must be connected to use this mode.
BEACON FREQUENCY
DGPS reference station can be searched au-
tomatically or manually. For manual search,
select MANUAL here, and use the cursor pad
to select frequency of DGPS reference sta-
tion. The default setting is AUTO.
BEACON BAUD RATE
Selects the transmission rate of the DGPS
reference station nearest you, among AUTO
(default setting), 50, 100 or 200 bps. This
setting is only effective when the DGPS mode
is “manual”; baud rate cannot be changed in
automatic DGPS mode.
DGPS ALARM
Enable/disable the DGPS alarm. When en-
abled, the audio alarm sounds three times if
position cannot be found with DGPS. The
default setting is ON.
TD SETUP menu
This menu selects the Loran C or Decca
chain to use to display position in TDs. To
display it, press the [MENU] key followed by
the soft keys GPS/DPGS/TD OPTIONS and
TD SETUP.
TD
SETUP
DGPS 3D
RETURN
LORAN C
GRI 9940 11-27
U.S. WEST COAST
CORRECTION1 +000.0 s
CORRECTION2 +000.0 s
DECCA
DEC CHAIN 20 R-P
FRENCH
CORRECTION1 +00.00 lane
CORRECTION2 +00.00 lane
s
EDIT
Figure10-10 TD setup menu
Displaying LORAN C TDs
1. Select GRI and press the soft key EDIT
to show the GRI & sta. pair window.
GRI & STA. PAIR
9940 s 11-27
U.S. WEST COAST
Figure 10-11 GRI & sta. pair window
2. Press or to select GRI code. Press
s to enable selection of station pair, and
then press or to select station pair.
See the Loran C chain list at the end of
this manual for GRI and station pairs.
3. Press the soft key ENTER or the [ENTER]
key to register your selection.
4. If necessary, you may enter a position off-
set to refine Loran C position. Select LO-
RAN C CORRECTION1 or
CORRECTION2 and press the soft key
EDIT. Enter correction value and press the
soft key ENTER or the [ENTER] key. Use
the soft key + <--> - to switch from plus to
minus and vice versa.
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno GP1850D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno GP1850D in the language / languages: English as an attachment in your email.

The manual is 1,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info