13375
22
Zoom out
Zoom in
Previous page
1/84
Next page
3-2
3.2 Stopping/Restarting
Plotting of Track
When your boat is at anchor or returning to
port you probably won’t need to record its
track. You can stop recording the track, to
conserve the track memory, as follows:
1. Press the [MENU] key followed by the soft
keys CHART SETUP OPTIONS and
TRACK CONTROL.
2. Press the soft key STOP TRACK. The in-
dication “TRACKING” in the TRACK STA-
TUS window changes to “NOT
TRACKING”.
To restart recording the track, press the soft
key START TRACK at step 2 in the above
procedure.
When the fishing mode is selected, you can
stop or restart plotting the track with the soft
key only on the plotter display. Press the
[SHOW/HIDE] key several times to show the
soft key STOP TRACK. Press the soft key
STOP TRACK on the plotter display to stop
plotting of track. HOLD TRACK PLOTTING
appears approx. 2 seconds and own ship
mark changes to hollow circle. To restart plot-
ting the track, press the soft key START
TRACK. START TRACK PLOTTING appears
approx. 2 seconds and the plotting restarts.
3.3 Changing Track Color
Track can be displayed in red, yellow, green,
light-blue, purple, blue or white. It can be use-
ful to change track color on a regular basis
to discriminate between previous day's track,
past track, etc.
1. Press the [MENU] key followed by the soft
keys CHART SETUP OPTIONS and
TRACK CONTROL.
2. Press or to select TRACK COLOR.
3. Press the soft key EDIT to display the
track color window.
TRACK COLOR
' RED
YELLOW
GREEN
LIGHT BLUE
PURPLE
BLUE
WHITE
Figure 3-4 Track color window
4. Press or to select the color desired.
5. Press the soft key ENTER to finish.
When the fishing mode is selected, you can
change track color with the soft key only on
the track display.
1. Press the [SHOW/HIDE] key several
times to show the soft key TRACK
COLOR.
2. Press the soft key TRACK COLOR to
show the TRACK COLOR window.
3. Press or to select the color desired.
4. Press the soft key ENTER or the [ENTER]
key to finish, or press the soft key CAN-
CEL to escape.
3.4 Track Plotting Method,
Interval
In drawing the track, first the ships position
(fed from the DGPS/GPS receiver) is stored
into the units memory at an interval of time
or distance. A shorter interval provides bet-
ter reconstruction of the track, but the stor-
age time of the track is reduced. When the
track memory becomes full, the oldest track
is erased to make room for the latest.
Track plotting method
1. Press the [MENU] key followed by the soft
keys CHART SETUP OPTIONS and
TRACK CONTROL.
2. Press or to select PLOT.
3. Press the soft key EDIT to display the plot
window.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno GP1650D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno GP1650D in the language / languages: English as an attachment in your email.

The manual is 1,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info