13373
60
Zoom out
Zoom in
Previous page
1/97
Next page
8. MENU SETTINGS
8-12
To Previous Page
MSB
Parity EVEN ODD NONE
Stop Bit 1 2
Baud Rate 4800 9600
DATA 4 I/O SETUP "DGPS" 2/2
MENU : Escape
ENT : Enter
: Select
First Bit
LSB
Figure 8-27 DATA 4 I/O SETUP
"DGPS" 2/2 menu
7) Press
or to select First Bit.
8) Press
or to select first bit; MSB or
LSB.
9) Press
to select Parity.
10) Press
or to select parity bit; EVEN,
ODD or NONE.
11) Press
to select Stop Bit.
12) Press
or to select stop bit; 1 or 2.
13) Press
to select Baud Rate.
14) Press
or to select baud rate; 4800
or 9600.
15) Press the MENU ESC key.
8.7 Displaying GPS Monitor
Displays
Three GPS monitor displays provide GPS
information:
Satellite monitor which shows position of
GPS satellites
Beacon receiver monitor which displays
DGPS beacon station information
DGPS beacon station message monitor
which displays messages received from
beacon stations
To display the GPS monitor displays;
1) Press MENU ESC and 7.
2) Press
to display the GPS monitor
you want to view.
Press the MENU ESC to escape.
MENU:Escape
Jan 21 2006 23:59’59" U
:BEACON RCVR MONITOR
DOP:1.5
SV (PRN)
SNR
30
40
50
01
12
31
16
18
19
09
08
Fixing date and time
GPS fix
state
Satellite
distribution
Number, bearing and elevation angle of all satellites
in view of the GPS receiver appear. Satellites being
used in fixing position are circled with a solid line;
satellites not being used in fixing position are circled
with a dashed line.
Receive signal level
DOP value
SATELLITES MONITOR
N
S
WE
01
12
31
09
18
19
08
16
(When signal level is more than 35, it is
used for positioning.)
Satellite number with circle
is used for positioning.
24
24
W3D 100m
SAFE
134
*
*: This indication appears in the WAAS mode.
MENU:Escape
Jan 21 2006 23:59’59" U
:STATION MESSAGE
DGPS INTEGRITY STATUS
ID: _ _ _ _
NAME:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Bit Rate: _ _ _ bps
Sig Strength: _ _ dB
Health: _
Freq: _ _ _ . _ kHz
SNR: _ _ dB
DGPS DATA: Good
BEACON STATION:
MENU:Escape
Jan 21 2006 23:59’59" U
:SATELLITES MONITOR
Message:
STATION IS OPERATING.
Good
DGPS data and DGPS
station receiving condition
DGPS station
data
BEACON RECEIVER MONITOR
STATION MESSAGE
Return to SATELLITES
MONITOR
D3D 100m
SAFE
D3D 100m
SAFE
60


Need help? Post your question in this forum.

Forumrules
1

Forum

furuno-gp150

Reset search

  • Furuno GP-150. The gps date is suddenly changed to 2002 May 20.How can I change back the present date?
    Submitted on 4-1-2022 at 12:52

    Reply Report abuse
  • Furuno GP-150. The gps date is suddenly changed to 2002 May 20.How can I change back the present date? Submitted on 4-1-2022 at 01:07

    Reply Report abuse
  • How to setup the present date of GP150 GPS when suddenly changed of date automatically? Submitted on 3-1-2022 at 18:02

    Reply Report abuse
  • The gps date is suddenly changed to 2002 May19.How can I change back the present date? Submitted on 2-1-2022 at 10:48

    Reply Report abuse
  • The date is suddenly changed to 2002 May19.How to change back the present date? Submitted on 2-1-2022 at 10:45

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno GP150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno GP150 in the language / languages: English as an attachment in your email.

The manual is 1,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info