13373

Furuno GP150 Manual

45
Zoom out
Zoom in
Previous page
1/97
Next page
7-1
7. ALARMS
There are seven alarm conditions which
generate both audible and visual alarms.
When an alarm setting is violated, the buzzer
sounds and the name of the offending alarm
appears on the display. The alarm icon also
appears on the Plotter 1, Plotter 2 and
Highway displays.
234°
BRG
345°
123
12.3
SOG
nm
COG
Arrival alarm
Speed alarm
Press CLEAR to silence beep
Press CLEAR
Press CLEAR to close window
Alarm message
Alarm
icon
34° 23.456· N 135° 45.678· E
RNG
D3D 100m
SAFE
Figure 7-1 Location of alarm messages and
alarm icon
7.1 Arrival Alarm, Anchor
Watch Alarm
Arrival alarm
The arrival alarm informs you that own ship
is approaching a destination waypoint. The
area that defines an arrival zone is that of a
circle which you approach from the outside
of the circle. The alarm will be released if
own ship enters the circle.
Own ship’s
position
Destination
waypoint
: Alarm range
Alarm
setting
Figure 7-2 How the arrival alarm works
1) Press the MENU ESC key.
2) Press 4 to display the ALARM
SETTINGS menu.
Arrival/Anchor Arr. Anc. Off
Alarm Range 0.100nm
XTE On Off
Alarm Range 0.050nm
Ship Speed In Over Off
Speed Rage 000.0 ~ 025.0kt
Next Page
ALARM SETTINGS 1/2
Over
Ship Speed
MENU : Escape
: Select
ENT : Enter
Figure 7-3 ALARM SETTINGS
menu, page 1/2
3) Press
or to select Arrival/Anchor.
4) Press
or to select Arr.
5) Press
to select Alarm Range.
6) Key in alarm range (0.001-9.999 nm).
7) Press the NU/CU ENT key.
8) Press the MENU ESC key.
When own ship nears a waypoint by the
range set here, the buzzer sounds and the
message "Arrival alarm" appears. You can
silence the audible alarm by pressing the
CLEAR key. To erase the visual alarm, press
the CLEAR key again.
To disable the alarm, select Off at step 5.
… 45 …


Need help? Post your question in this forum.

Forumrules
1

Forum

furuno-gp150

Reset search

  • Furuno GP-150. The gps date is suddenly changed to 2002 May 20.How can I change back the present date?
    Submitted on 4-1-2022 at 12:52

    Reply Report abuse

  • Furuno GP-150. The gps date is suddenly changed to 2002 May 20.How can I change back the present date? Submitted on 4-1-2022 at 01:07

    Reply Report abuse

  • How to setup the present date of GP150 GPS when suddenly changed of date automatically? Submitted on 3-1-2022 at 18:02

    Reply Report abuse

  • The gps date is suddenly changed to 2002 May19.How can I change back the present date? Submitted on 2-1-2022 at 10:48

    Reply Report abuse

  • The date is suddenly changed to 2002 May19.How to change back the present date? Submitted on 2-1-2022 at 10:45

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno GP150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno GP150 in the language / languages: English as an attachment in your email.

The manual is 1,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info