13373
15
Zoom out
Zoom in
Previous page
1/97
Next page
2-1
2. TRACK
2.1 Enlarging/Shrinking the
Display
You may enlarge and shrink the display on
the Plotter 1, Plotter 2 and Highway displays,
with the ZOOM IN and ZOOM OUT keys. The
horizontal range is available among 0.25, 0.5,
1, 2, 4, 8, 16, 32, 64, 128 and 192 nautical
miles for Plotter 1 and Highway, and 0.36,
0.71, 1.42, 2.84, 5.69, 11.38, 22.76, 45.51,
91.02, 182.04, 273.07 nautical miles for
Plotter 2 display.
The ZOOM IN key enlarges the display and
the ZOOM OUT key shrinks it. Each time a
zoom key is pressed the display range
appears at the center of the display for about
one seconds.
2.2 Selecting Display
Orientation
Display orientation can be selected on the
Plotter 1 and Plotter 2 displays, with the
NU/CU ENT key. Two display orientations are
available: north-up and course-up.
North-up display
In the north-up display, true north (0°) is at
the top of the display. Own ship moves on the
display in accordance with true motion. Land
is stationary.
Course-up display
Destination set
The destination is at the top of the display
and the north mark (
) appears at the left
side of the display.
Destination not set
Ship's course is upward on the screen at the
moment the course-up mode is selected. The
north mark appears at the left side of the
display.
2.3 Shifting the Cursor
The cursor can be shifted with the cursor
pads.
1) Press the CURSOR ON/OFF key to turn
on the cursor.
2) Press the cursor pads.
The cursor moves in the direction of the
cursor pads pressed. When the cursor
reaches the edge of the display, the display
shifts in the direction opposite.
Data and cursor state
Cursor state determines what data are shown
on the display.
Cursor turned on, cursor data
Cursor position is displayed in latitude and
longitude or LOPs (depending on menu
setting) at the top of the display. The range
and bearing from own ship to the cursor
appear at the right hand side of the display,
when in the Plotter 1 display.
234°
BRG
345°
BRG TO +
123°
11.5
RNG TO +
nm
COG
2.0 nm
Cursor mark Cursor position in
latitude and longitude
Cursor
Range from own
ship to cursor
Bearing from own
ship to cursor
34° 23.456´ N 135° 45.678´ E
WGS84
D3D 100m
SAFE
Figure 2-1 Data displayed when the cursor is
turned on
15


Need help? Post your question in this forum.

Forumrules
1

Forum

furuno-gp150

Reset search

  • Furuno GP-150. The gps date is suddenly changed to 2002 May 20.How can I change back the present date?
    Submitted on 4-1-2022 at 12:52

    Reply Report abuse
  • Furuno GP-150. The gps date is suddenly changed to 2002 May 20.How can I change back the present date? Submitted on 4-1-2022 at 01:07

    Reply Report abuse
  • How to setup the present date of GP150 GPS when suddenly changed of date automatically? Submitted on 3-1-2022 at 18:02

    Reply Report abuse
  • The gps date is suddenly changed to 2002 May19.How can I change back the present date? Submitted on 2-1-2022 at 10:48

    Reply Report abuse
  • The date is suddenly changed to 2002 May19.How to change back the present date? Submitted on 2-1-2022 at 10:45

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno GP150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno GP150 in the language / languages: English as an attachment in your email.

The manual is 1,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info