522155
37
Zoom out
Zoom in
Previous page
1/52
Next page
31
Calibrating speed/water temperature sensor, setting draft
The optional speed/water temperature sensor may be calibrated as below to compensate
for error. If you require depth from the sea surface (rather than the transducer), set it with
“DRAFT SETUP.”
For either sensor calibration or draft setting, enter a minus value if the actual value is lower
than the sensor data, or a plus value if the actual value is higher than the sensor data. For
example, if the actual speed is 11.0 kt and the speed data output by the sensor is 10.0 kt,
enter +10(%).
1. Use the [DISP] key to choose an echo sounder display.
2. Press the [MENU] key.
3. Rotate the [ENTER] knob to choose SOUNDER from the menu bar and then push the
[ENTER] knob.
AUTO MODE PRESET FISH
DISPLAY MODE NORMAL
FREQUENCY 50 KHz
PICTURE ADVANCE 1/1
TEMPERATURE GRAPH On
ZOOM MARKER On
A-SCOPE Off
SOUNDER SETUP
SENSOR SETUP
ECHO SOUNDER menu
4. Rotate the [ENTER] knob to choose SENSOR SETUP and then push the [ENTER]
knob.
DRAFT +000.0 Ft
SPEED CALIBRATION +00 %
TEMP CALIBRATION +00.00
°
F
ACOUSTIC SPEED CALIBRATION +00 m/s
SENSOR SETUP menu
5. Rotate the [ENTER] knob to choose DRAFT, SPEED CALIBRATION, TEMP
CALIBRATON or ACOUSTIC SPEED CALIBRATION as appropriate.
DRAFT: Enter ship’s draft to get depth from sea surface (instead of transducer).
SPEED CALIBRATION: Find correct speed from known source and enter offset to
correct on-screen speed indication.
TEMP CALIBRATION: Find correct water temperature from known source and enter
offset to correct on-screen water temperature indication.
ACOUSTIC SPEED CALIBRATION: Water temperature or salinity content can affect
the depth measurement. Find correct acoustic speed from know source and enter offset
to correct on-screen depth indication.
6. Push the [ENTER] knob. The cursor is selecting the plus sign (or minus sign). If it is
necessary to switch from plus to minus or vice versa, rotate the [ENTER] knob to choose
plus or minus and then push the [ENTER] knob. If not necessary, go to step 7. (Choose
minus if the actual value is lower than the value output by the sensor, or choose plus if
the actual value is higher than the value output by the sensor.)
7. Push the [ENTER] knob.
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno GP-7000F at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno GP-7000F in the language / languages: English as an attachment in your email.

The manual is 1,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Furuno GP-7000F

Furuno GP-7000F User Manual - English - 124 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info