522157
65
Zoom out
Zoom in
Previous page
1/88
Next page
9. INSTALLATION
55
9.3 Wiring
The illustration below shows where to
connect cables on the rear of the display unit.
Please review the INSTALLATION
GUIDELINES at the front of this manual
before wiring the equipment.
Black
Red
(12-24 VDC)
Ground
1A Fuse
(+/- line)
ANTENNA UNIT
GPA-017
(For GP-32)
+
-
POWER
DISPLAY UNIT
GP-32 OR GP-37
ANTENNA UNIT
GPA-019
(For GP-37)
OR
With 10 m
cable
MJ-A7SPF0009-020,
2 m
*
* = Cut unused cores
and tape individually.
Wiring
Note: The fuse holder contains a spring that
fixes the fuse. To prevent detachment of the
spring, which would cause loss of power, tie
the line as shown below.
Fuse Holder
+ Line (Red)
- Line (Black)
Fix here.
How to fix spring in fuse holder
Grounding
The display unit contains a CPU. While it is
operating, it radiates noise, which can
interfere with radio equipment. Ground the
unit as follows to prevent interference:
The ground wire for the display unit should
be 1.25sq or larger and as short as
possible.
The signal ground and frame ground are
separated, however the power line is not
isolated. Therefore, do not connect the
signal ground to the frame ground when
connecting other equipment to a positive
ground battery.
External equipment
The power supply port is commonly used for
connection of external equipment such as a
radar. Refer to the interconnection diagram
on page S-1 or S-2 for connection of external
equipment.
65


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno GP-37 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno GP-37 in the language / languages: English as an attachment in your email.

The manual is 1,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Furuno GP-37

Furuno GP-37 Quick start guide - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info