522158

Furuno GP-32 Manual

5
Zoom out
Zoom in
Previous page
1/88
Next page
iii
TABLE OF CONTENTS
FOREWORD ...................................v
SYSTEM CONFIGURATION..........vi
WHAT IS WAAS?..........................vii
EQUIPMENT LISTS..................... viii
1.
OPERATIONAL OVERVIEW......1
1.1
Controls ...................................... 1
1.2
Turning On and Off Power .......... 2
1.3
Adjusting Brilliance and Contrast 2
1.4
Display Modes ............................ 3
1.5
Menu Overview........................... 7
1.6
Simulation Display ...................... 8
2.
PLOTTER DISPLAY OVERVIEW9
2.1
Choosing the Display Range....... 9
2.2
Shifting the Cursor...................... 9
2.3
Shifting the Display ................... 10
2.4
Centering Own Ship’s Position.. 10
2.5
Changing Track Plotting Interval,
Stopping Plotting....................... 10
2.6
Erasing Track.............................11
3.
WAYPOINTS (MARKS)............13
3.1
Entering Waypoints................... 13
3.2
Entering the MOB Mark ............ 15
3.3
Displaying Waypoint Name....... 16
3.4
Operations on the Waypoint List 16
3.5
Erasing Waypoints.................... 17
3.6
Speed for Calculating Time-to-Go,
Estimated Time of Arrival.......... 18
4.
ROUTES...................................19
4.1
Creating Routes........................ 19
4.2
Editing Routes .......................... 23
4.3
Erasing Routes ......................... 25
5.
DESTINATION..........................27
5.1
Setting Destination by Cursor ... 27
5.2
Setting Destination by Waypoint 27
5.3
Setting Route as Destination..... 28
5.4
Setting User Waypoint as
Destination................................ 28
5.5
Canceling Destination............... 28
6.
ALARMS...................................29
6.1
Arrival Alarm, Anchor Watch
Alarm.........................................29
6.2
XTE (Cross Track Error) Alarm..30
6.3
Speed Alarm..............................31
6.4
WAAS/DGPS Alarm ..................31
6.5
Time Alarm................................31
6.6
Trip Alarm..................................32
6.7
Odometer Alarm........................32
6.8
Buzzer Type Selection...............32
7.
OTHER FUNCTIONS ...............33
7.1
Calculating Range, Bearing,
TTG and ETA ............................33
7.2
WAAS Setup .............................34
7.3
DGPS setup ..............................35
7.4
Bearing Reference.....................37
7.5
Magnetic Variation.....................38
7.6
Geodetic Chart System .............38
7.7
Units of Measurement ...............38
7.8
Position Display Format.............39
7.9
Time Difference (using local time),
Time Format..............................39
7.10
GPS Setup ................................40
7.11
User Display Setup....................41
7.12
Resetting Trip and Odometer
Distances ..................................42
7.13
Uploading, Downloading
Waypoint, Route Data................43
7.14
Language ..................................46
8.
MAINTENANCE &
TROUBLESHOOTING .............47
8.1
Maintenance..............................47
8.2
Displaying the Message Board..47
8.3
Replacing the Fuse....................48
8.4
Replacing the Battery ................48
8.5
Satellite Monitor Display ............49
8.6
Diagnostics................................49
8.7
Clearing Data ............................50
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno GP-32 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno GP-32 in the language / languages: English as an attachment in your email.

The manual is 1,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Furuno GP-32

Furuno GP-32 Quick start guide - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info