716650
42
Zoom out
Zoom in
Previous page
1/67
Next page
Great user manuals database on UserManuals.info
8-2
2D
N
DOP
1. 5
02
DOP value
Satellite number in reverse video
is used for positionin
g
.
09
11
17
04
06
14
– –
02
04
06
09
11
14
17
Altitude
North
GPS fix
state
Receive signal level
Bars show signal level.
Satellites whose signal
level extends past the
dashed line are used
in fixing position.
85m
Figure 8-2 GPS satellite monitor display
4. Press the [MENU] key twice to quit the
SATELLITE display.
8.4 Self Test
The self test checks ROM, RAM, data port,
beacon receiver, battery, RTC, keyboard and
LCD for proper operation.
1. Press the [MENU] key twice.
2. Select SYS SETUP and press the [ENT]
key.
3. Select SELF TEST? and press the [ENT]
key.
TEST START ?
(STOP: PWR OFF)
ARE YOU SURE ?
YES NO
Figure 8-3 TEST START screen
4. Press the [ENT] key to start the test.
5. The equipment tests devices, data port,
beacon receiver, battery and RTC. The
results are individually displayed as OK
or NG (No Good). (NONE appears next
to BEACON when no beacon receiver
is connected.)
SELF TEST
ROM : OK
RAM : OK CNT=001
DATA2 : OK
BEACON : OK
BATTERY : OK
RTC : OK
205-1111-XXX (STOP: PWR OFF)
No. of
consecutive
tests
Figure 8-4 SELF TEST display
6. After the equipment has checked the
items mentioned in step 5, a beep sounds
and the message PUSH KEY appears.
7. Press each key one by one. The name of
the key pressed momentarily appears at
the lower right-hand corner if the key is
functioning properly.
Note: If no key is pressed within several
seconds, the equipment automatically
proceeds to step 8.
8. The equipment displays the following
message to inform you that it is now go-
ing to check the LCD:
<LCD CHECK>
ALL ON 2 SEC.
ALL OFF 3 SEC.
Figure 8-5 LCD CHECK screen
9. The test repeats after the LCD is checked.
To stop the test, turn off the power.
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno GP-30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno GP-30 in the language / languages: English as an attachment in your email.

The manual is 1,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info