716650
10
Zoom out
Zoom in
Previous page
1/67
Next page
Great user manuals database on UserManuals.info
1-3
1.3 Turning On and Off the
Power
Turning on the power
Press and hold down the [DIM/PWR] key.
The unit beeps and then starts up with the
last-used display mode.
The GP-30/35 takes about two minutes to
find its position when turned on for the very
first time. This is because the default posi-
tion is San Francisco, USA. If you want to
lessen the time needed to find position you
may enter your position manually on the
SIMULATOR screen of the SYSTEM
SETUP MENU, referring to 1.7 Simulator
Display on page 1-8. Thereafter it takes
about 20 seconds to find position each time
the power is turned on.
If position could not be found, “GPS NO
FIX” appears at the center of the display.
When the satellite signal is being received
normally, the GP-30/35 displays various ab-
breviations at the top left-hand corner of the
display which show receiver status. Table
1-1 shows these abbreviations and their
meanings.
Table 1-1 Display abbreviations
noitacidnIgninaeM
D2xifnoitisopSPGD2lamroN
POD
PODhtiwxifnoitisopSPG
4nahterom
D3xifnoitisopSPGD3lamroN
POD)6nahteromPOD(POD
D2D
SPGlaitnereffidlamroN
xifnoitisop
POD
noitisopSPGlaitnereffiD
4nahteromPODhtiwxif
D3D
SPGlaitnereffidD3lamroN
xifnoitisop
POD
xifnoitisopSPGlaitnereffiD
6nahteromPODhtiw
MIS.edomnoitalumiS
Turning off the power
Press and hold down the [DIM/PWR] key
until the screen goes blank.
1.4 Adjusting Display Dimmer
and Contrast
1. Press the [DIM/PWR] key. The display
shown in Figure 1-3 appears.
DIMMER (1~8)
CONTRAST (0~63)
s
t
4
41
EXIT:[ENT]
Figure 1-3 Screen for adjustment of
display dimmer and contrast
2. To adjust the dimmer, press or . Cur-
rent setting is shown to the right of “”.
3. To adjust the contrast, press t or s.
Current setting is shown to the right of
s”.
4. Press the [ENT] key to finish.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno GP-30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno GP-30 in the language / languages: English as an attachment in your email.

The manual is 1,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info